Preparation of BaTiO3 films by CVD

Hidenobu Nakazawa, Hisanori Yamane, Toshio Hirai

    Research output: Contribution to journalArticlepeer-review

    7 Citations (Scopus)

    Abstract

    Thin films of BaTiO3 were prepared by CVD using barium β-diketonate chelate {Ba(C11H19O2)2} and titanium tetra-isopropoxide {Ti[OCH(CH3)2]4} as precursors. BaTiO3 films deposited from 700° to 1000°C on MgO (100) substrates showed prominent a-axis orientation. X-ray pole figure measurement by Schulz's reflected method indicated that the CVD-BaTiO3 films deposited from 900° to 1000°C grew epitaxially on MgO (100) substrates. SEM observation showed that rectangular grains aligned two dimensionally in the plane of the films deposited at 1000°C.

    Original languageEnglish
    Pages (from-to)527-529
    Number of pages3
    JournalNippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan
    Volume99
    Issue number1150
    DOIs
    Publication statusPublished - 1991

    ASJC Scopus subject areas

    • Ceramics and Composites
    • Chemistry(all)
    • Condensed Matter Physics
    • Materials Chemistry

    Fingerprint

    Dive into the research topics of 'Preparation of BaTiO3 films by CVD'. Together they form a unique fingerprint.

    Cite this