Precision measurement of vertical straightness of a roll workpiece on an ultra-precision lathe

Zengyuan Niu; Yuanliu Chen; Daiki Matsuura; Ryo Kobayashi; Yuki Shimizu; So Ito; I Ko; Jeongseok Oh; Chunhong Park

Precision measurement of vertical straightness of a roll workpiece on an ultra-precision lathe

Zengyuan Niu, Yuanliu Chen, Daiki Matsuura, Ryo Kobayashi, Yuki Shimizu, So Ito, I Ko, Jeongseok Oh, Chunhong Park

ENG - Finemechanics

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

This paper presents a measurement method for vertical straightness of a roll workpiece on an ultra-precision lathe. The measurement of vertical straightness of a roll workpiece is directly influenced by the vertical error motions of carriage slide, which is composed of the out-of-straightness error component and the out-of-parallelism error component. The effect by the vertical error motions should be compensated in the measurement of vertical straightness of a roll workpiece. A three-probe method and new algorithms are employed to measure and evaluate both the vertical straightness and the vertical error motions, which are newly introduced. Experiments are carried out on a small roll workpiece.

Original language	English
Title of host publication	Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015
Publisher	Japan Society of Mechanical Engineers
Publication status	Published - 2015 Oct 18
Event	8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015 - Kyoto, Japan Duration: 2015 Oct 18 → 2015 Oct 22

Other

Other	8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015
Country/Territory	Japan
City	Kyoto
Period	15/10/18 → 15/10/22

Keywords

Reversal method and separation method
Three-probe measurement method
Two-probe measurement method
Vertical error motions of carriage slide
Vertical straightness of a roll workpiece

ASJC Scopus subject areas

Industrial and Manufacturing Engineering

Cite this

Precision measurement of vertical straightness of a roll workpiece on an ultra-precision lathe. / Niu, Zengyuan; Chen, Yuanliu; Matsuura, Daiki et al.

Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015. Japan Society of Mechanical Engineers, 2015.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Niu, Z, Chen, Y, Matsuura, D, Kobayashi, R, Shimizu, Y, Ito, S, Ko, I, Oh, J & Park, C 2015, Precision measurement of vertical straightness of a roll workpiece on an ultra-precision lathe. in Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015. Japan Society of Mechanical Engineers, 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan, 15/10/18.

@inproceedings{271c801567a24edca30e63dd94fc085e,

title = "Precision measurement of vertical straightness of a roll workpiece on an ultra-precision lathe",

abstract = "This paper presents a measurement method for vertical straightness of a roll workpiece on an ultra-precision lathe. The measurement of vertical straightness of a roll workpiece is directly influenced by the vertical error motions of carriage slide, which is composed of the out-of-straightness error component and the out-of-parallelism error component. The effect by the vertical error motions should be compensated in the measurement of vertical straightness of a roll workpiece. A three-probe method and new algorithms are employed to measure and evaluate both the vertical straightness and the vertical error motions, which are newly introduced. Experiments are carried out on a small roll workpiece.",

keywords = "Reversal method and separation method, Three-probe measurement method, Two-probe measurement method, Vertical error motions of carriage slide, Vertical straightness of a roll workpiece",

author = "Zengyuan Niu and Yuanliu Chen and Daiki Matsuura and Ryo Kobayashi and Yuki Shimizu and So Ito and I Ko and Jeongseok Oh and Chunhong Park",

year = "2015",

month = oct,

day = "18",

language = "English",

booktitle = "Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015",

publisher = "Japan Society of Mechanical Engineers",

address = "Japan",

note = "8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015 ; Conference date: 18-10-2015 Through 22-10-2015",

}

TY - GEN

T1 - Precision measurement of vertical straightness of a roll workpiece on an ultra-precision lathe

AU - Niu, Zengyuan

AU - Chen, Yuanliu

AU - Matsuura, Daiki

AU - Kobayashi, Ryo

AU - Shimizu, Yuki

AU - Ito, So

AU - Ko, I

AU - Oh, Jeongseok

AU - Park, Chunhong

PY - 2015/10/18

Y1 - 2015/10/18

N2 - This paper presents a measurement method for vertical straightness of a roll workpiece on an ultra-precision lathe. The measurement of vertical straightness of a roll workpiece is directly influenced by the vertical error motions of carriage slide, which is composed of the out-of-straightness error component and the out-of-parallelism error component. The effect by the vertical error motions should be compensated in the measurement of vertical straightness of a roll workpiece. A three-probe method and new algorithms are employed to measure and evaluate both the vertical straightness and the vertical error motions, which are newly introduced. Experiments are carried out on a small roll workpiece.

AB - This paper presents a measurement method for vertical straightness of a roll workpiece on an ultra-precision lathe. The measurement of vertical straightness of a roll workpiece is directly influenced by the vertical error motions of carriage slide, which is composed of the out-of-straightness error component and the out-of-parallelism error component. The effect by the vertical error motions should be compensated in the measurement of vertical straightness of a roll workpiece. A three-probe method and new algorithms are employed to measure and evaluate both the vertical straightness and the vertical error motions, which are newly introduced. Experiments are carried out on a small roll workpiece.

KW - Reversal method and separation method

KW - Three-probe measurement method

KW - Two-probe measurement method

KW - Vertical error motions of carriage slide

KW - Vertical straightness of a roll workpiece

UR - http://www.scopus.com/inward/record.url?scp=84974530754&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84974530754&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84974530754

BT - Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015

PB - Japan Society of Mechanical Engineers

T2 - 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015

Y2 - 18 October 2015 through 22 October 2015

ER -

Precision measurement of vertical straightness of a roll workpiece on an ultra-precision lathe

Abstract

Other

Keywords

ASJC Scopus subject areas

Other files and links

Fingerprint

Cite this