Piv analysis of the flow pattern around an ablation catheter to observe the flow effect on the electrode

Kaihong Yu, Tetsui Yamashita, Shigeaki Shingyochi, Kazuo Matsumoto, Makoto Ohta

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)


Radiofrequency (RF) catheter ablation is a highly effective treatment for many cardiac arrhythmias, especially for tachyarrhythmia. RF energy is introduced through the catheter onto the endocardial surface to destroy the abnormal heart tissue causing the heart rhythm disorder. Many parameters relate to myocardial temperature, such as RF power, tissue contact, and blood flow. Blood flow is an important factor that has a cooling effect on myocardium and affects the final lesion size. Many previous studies have shown that under temperature control, lesion sizes are larger and tissue temperatures rise faster with a high flow rate. If the flow causes a decrease in the temperature of the catheter tip, the generator will increase the power output to maintain the tip at a constant temperature. However, few studies of RF catheter ablation have investigated how ablation affects blood flow. Observation of the flow pattern around the catheter can help to determine the mechanism of the flow effects on the temperature of the catheter tip. The purpose of this study is to observe the flow pattern during ablation using an in-vitro circulation system developed for Particle Image Velocimetry (PIV). We developed an open-channel circulation system to simulate blood flow. The mold for the open-channel was built with acrylic boards for transparency. The working fluid was 0.9% saline, which was used at room temperature (20°C). Instead of animal myocardium, we used a poly (vinyl alcohol) hydrogel (PVA-H), which has mechanical characteristics that approximate those of biological soft tissue, and contact with the PVA-H surface by the catheter is similar to that with myocardium. A 7 Fr catheter with a 4-mm ablation electrode tip was set perpendicular to the PVA-H surface, and the contact weight between the electrode of the catheter and the PVA-H surface was 2.2 gf. To measure the temperature profile in the PVA-H, a K-type thermocouple with the diameter of 0.5 mm was placed at the depth of 2 mm from the surface. The thermocouple tip was always placed on the catheter axis. The flow pattern at the location where the catheter was held was observed by a high speed camera, and the resulting images were analyzed by particle image velocimetry (PIV). The results showed that in the absence of applied flow, convection flow from the electrode is observed in the areas around the catheter. However, under a 1.6 L/min flow rate, convection flow disappears. In conclusion, blood flow could decrease the catheter tip temperature, and the influence of ablation in the flow around the catheter disappeared.

Original languageEnglish
Title of host publicationBiomedical and Biotechnology Engineering
PublisherAmerican Society of Mechanical Engineers (ASME)
ISBN (Print)9780791856215
Publication statusPublished - 2013 Jan 1
EventASME 2013 International Mechanical Engineering Congress and Exposition, IMECE 2013 - San Diego, CA, United States
Duration: 2013 Nov 152013 Nov 21

Publication series

NameASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
Volume3 A


OtherASME 2013 International Mechanical Engineering Congress and Exposition, IMECE 2013
Country/TerritoryUnited States
CitySan Diego, CA

ASJC Scopus subject areas

  • Mechanical Engineering


Dive into the research topics of 'Piv analysis of the flow pattern around an ablation catheter to observe the flow effect on the electrode'. Together they form a unique fingerprint.

Cite this