Pile-up glass microreactor

Yoshikuni Kikutani, Akihide Hibara, Kenji Uchiyama, Hideaki Hisamoto, Manabu Tokeshi, Takehiko Kitamori

Research output: Contribution to journalArticlepeer-review

85 Citations (Scopus)

Abstract

We made a 'pile-up' microreactor in which ten levels of microchannel circuits were integrated to form a single glass entity. Solutions were distributed to each layer via cylindrical holes with a diameter much larger than that of the microchannel. Fabrication of the pile-up reactor was completed using only conventional photolithography, wet etching and thermal bonding techniques, and no special facilities or instruments were required. An amide formation reaction between amine in aqueous solution and acid chloride in organic solution was carried out using the pile-up reactor. The yield of the amide formation reaction is dependent on the size of the specific surface area between the two solutions, and the small space inside the microchannels is good for acquiring a large specific surface area without any stirring processes. The maximum throughput for the ten-layered pile-up reactor was ten times larger than that of a single-layered one, yet the reaction yield was still high. Productivity of the pile-up reactor for the reaction was as high as on a gram per hour scale. This value suggests that many conventional plants producing fine chemicals can be replaced by microreactors through the numbering-up technology.

Original languageEnglish
Pages (from-to)193-196
Number of pages4
JournalLab on a Chip
Volume2
Issue number4
DOIs
Publication statusPublished - 2002 Nov 1
Externally publishedYes

ASJC Scopus subject areas

  • Bioengineering
  • Biochemistry
  • Chemistry(all)
  • Biomedical Engineering

Fingerprint Dive into the research topics of 'Pile-up glass microreactor'. Together they form a unique fingerprint.

Cite this