Photocatalytic conversion of NO on AgCl/Al2O3 mixed with ZSM-5

Yohichi Yamashita, Yunzhi Gao, Kiyohide Yoshida, Noriyoshi Kakuta, Valery Petrykin, Masato Kakihana

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

Novel AgCl/Al2O3-ZSM-5 catalyst was prepared by mechanical mixing of AgCl impregnated Al2O3 with ZSM-5 powder and annealing at 873 K. The rate of NO conversion under UV illumination was evaluated in the presence of O2 in a flow-type reaction over the prepared material and compared against AgCl (Ag: 5.0 mass%)/Al2O 3 catalyst and previously studied AgCl/Al2O3 and Ag/Al2O3 catalysts. It was found that generally AgCl containing samples exhibit higher NO conversion rates. The major products of NO conversion over AgCl/Al2O3-ZSM-5 were N2 and O2, while NO was primarily converted to N2O on AgCl/Al2O3 sample. Characterizations of the prepared materials were carried out using XRD and UV-Vis diffuse reflectance spectroscopy. The peculiarities of the observed behavior were discussed.

Original languageEnglish
Pages (from-to)509-512
Number of pages4
JournalJournal of the Ceramic Society of Japan
Volume113
Issue number1320
DOIs
Publication statusPublished - 2005 Aug
Externally publishedYes

Keywords

  • Photocatalytic conversion
  • ZSM-5

ASJC Scopus subject areas

  • Ceramics and Composites
  • Chemistry(all)
  • Condensed Matter Physics
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Photocatalytic conversion of NO on AgCl/Al2O3 mixed with ZSM-5'. Together they form a unique fingerprint.

Cite this