PHASE STABILITY of L21 PHASE in Co-BASED HEUSLER ALLOYS

Rie Y. Umetsu, Akinari Okubo, Makoto Nagasako, Makoto Ohtsuka, Ryosuke Kainuma, Kiyohito Ishida

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

Order-disorder phase transition temperature from L21 to B2 phase, TtL21=B2, in Co-based Heusler alloys was systematically investigated based on the Braggs-Williams-Gorsky (BWG) approximation. Because height of TtL21=B2 closely correlates to phase stability of the L21 phase, confirmation of TtL21=B2 would be a key to obtain a highly ordered L21 phase. From modification with the BWG approximation it was shown that the degree of order indicated temperature dependence, namely, the degree of order decreased above around 0.6 TtL21=B2 and reached zero at TtL21=B2. Therefore, it should be better to select the Co-based Heusler alloys with a higher value of TtL21=B2 if the higher degree of order in the L21 phase is desired by thermal annealing at as low temperature as possible. From powder neutron diffraction (ND) studies of Co2Y Ga (Y = Ti, V, Cr, Mn and Fe) alloys it was actually confirmed that materials with higher value of TtL21=B2 indicated higher degree of order even in the same annealing temperature. Studies for the phase state in Co-Ti-Fe-Ga films also showed that a height of TtL21=B2 concretely correlated to the phase stability of the L21 phases, that is, the specimen with higher value of TtL21=B2 was easy to obtain with a higher degree of order.

Original languageEnglish
Article number1440018
JournalSPIN
Volume4
Issue number4
DOIs
Publication statusPublished - 2014 Dec 1

Keywords

  • Braggs-Williams-Gorsky approximation
  • degree of order
  • Order-disorder phase transition temperature
  • phase stability

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'PHASE STABILITY of L2<sub>1</sub> PHASE in Co-BASED HEUSLER ALLOYS'. Together they form a unique fingerprint.

Cite this