Performance boost of co-rich fe-co based alloy magnetostrictive sensors via nitrogen treatment

Kenya Nakajima, Hiroki Kurita, Fumio Narita

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

The inverse magnetostrictive response (i.e. a change in magnetization due to an applied stress)of magnetostrictive materials, the Villari effect is widely applied for sensor applications. Mechanical properties are an important factor when applied for vibration energy and sensor applications. Surface-treatment methods are widely used for enhanced performance and serviceability of engineering components, and nitriding is one of the most versatile surface engineering method nowadays. These methods allow the fine tuning of surface quality-dependent properties such as the resistance to fatigue, wear, and corrosion. In this study, the change of inverse magnetostrictive characteristics of Co-rich Fe-Co bimetals by the nitriding treatment, for 30 min at 580 °C, was evaluated. The effect of the nitriding treatment on the inverse magnetostrictive characteristics, magnetostrictive susceptibility and magnetic hysteresis loop of Fe-Co bimetals, by an applied load, were evaluated by three-point bending tests under a magnetic field. Furthermore, the output voltage of the as-rolled Fe-Co/Ni bimetal and the nitrided Fe-Co/Ni bimetal cantilevers, under bending vibration, were compared. The nitride Fe-Co/Ni bimetal construct exhibited a high output voltage compared to the as-rolled Fe/Ni bimetal.

Original languageEnglish
Pages (from-to)75-83
Number of pages9
JournalSensors and Actuators, A: Physical
Volume295
DOIs
Publication statusPublished - 2019 Aug 15

Keywords

  • Energy harvesting
  • Fe-Co/Ni bimetals
  • Magnetostrictive effect
  • Nitrogen treatment
  • Sensors

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Instrumentation
  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Performance boost of co-rich fe-co based alloy magnetostrictive sensors via nitrogen treatment'. Together they form a unique fingerprint.

  • Cite this