Non-destructive evaluation of a corroded metal surface using terahertz waves

Hidetaka Kariya, Akihiro Sato, Tadao Tanabe, Kyosuke Saito, Katsuhiro Nishihara, Akira Taniyama, Yutaka Oyama

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

In this paper, the possibility of utilizing characteristic absorption spectra in the terahertz (THz) frequency region for the nondestructive evaluation of a corroded metal surface coated with an insulator is discussed. The infrared activity of corrosion products in response to THz waves was characterized. The THz absorption spectra of Al(OH)3 and ZnCl 2·4Zn(OH)2 powders, which are typical corrosion products in Zn-Al alloy, were measured with a frequency tunable terahertz light source based on difference frequency generation from a GaP crystal. Characteristic absorption peaks were observed in both spectra. Subsequently, THz reflection imaging was conducted on a metal surface partially covered with these corrosion products and a coating. By using the characteristic absorption peaks of the corrosion products, the spatial distribution of these products was clearly obtained. From the results, it was shown that THz waves can be applied to the non-destructive evaluation of corroded metal surfaces coated with insulators.

Original languageEnglish
Title of host publicationECS Transactions
PublisherElectrochemical Society Inc.
Pages81-88
Number of pages8
Edition50
ISBN (Electronic)9781607685395
DOIs
Publication statusPublished - 2013

Publication series

NameECS Transactions
Number50
Volume50
ISSN (Print)1938-5862
ISSN (Electronic)1938-6737

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint

Dive into the research topics of 'Non-destructive evaluation of a corroded metal surface using terahertz waves'. Together they form a unique fingerprint.

Cite this