Nitriding of Co-Cr-Mo alloy in nitrogen

Ning Tang, Yunping Li, Yuichiro Koizumi, Akihiko Chiba

Research output: Contribution to journalArticlepeer-review

5 Citations (Scopus)

Abstract

Using the results of a thermodynamic analysis, a Co-Cr-Mo alloy was successfully nitrided in nitrogen at temperatures of 1073-1473 K. The near-surface microstructure of the treated Co-Cr-Mo alloy was characterized using X-ray diffraction, field-emission scanning electron microscopy, electron probe micro-analyzer, and transmission electron microscopy equipped with energy-dispersive X-ray spectroscopy. The results indicated that the highest nitriding efficiency was achieved at the treatment temperature of 1273 K, with the size and coverage of the nitride particles on sample's surface increasing with an increase in the treatment duration. After nitriding at 1273 K for 2 h, numerous nitride particles, consisting of an outer Cr2N layer and an inner π phase layer, were formed on top of the nitrogen-containing γ phase, and some π phase also precipitated in the alloy matrix at the sub-surface level.

Original languageEnglish
Pages (from-to)350-356
Number of pages7
JournalMaterials Chemistry and Physics
Volume145
Issue number3
DOIs
Publication statusPublished - 2014 Jun 16

Keywords

  • Alloys
  • Electron microscopy
  • Nitrides
  • Surfaces

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics

Fingerprint Dive into the research topics of 'Nitriding of Co-Cr-Mo alloy in nitrogen'. Together they form a unique fingerprint.

Cite this