(Nb,Ti)3Sn superconducting wire with CuNb reinforcing stabilizer

Hisaki Sakamoto, Sakaru Endoh, Yoshinori Nagasu, Katsunori Wada, Akio Kimura, Shin Ichiro Meguro, Satoshi Awaji, Kazuo Watanabe, Mitsuhiro Motokawa

Research output: Contribution to journalConference article

24 Citations (Scopus)

Abstract

An in-situ CuNb composite shows a high strength and a high electrical conductivity. Therefore, it is a suitable material for the reinforcement of Nb3Sn superconducting wire. Many studies about mechanical and electrical properties of Nb3Sn wire with CuNb reinforcing stabilizer have been carried out, but a fabricability of the long-length wire was not confirmed. In this study, 1 mm-diameter (Nb,Ti)3Sn superconducting wire with Cu-20 wt%Nb reinforcing stabilizer was fabricated 22 km in length. The wire showed a good fabricability throughout the production. Mechanical properties and critical currents are evaluated in comparison with un-reinforced one.

Original languageEnglish
Pages (from-to)1067-1070
Number of pages4
JournalIEEE Transactions on Applied Superconductivity
Volume12
Issue number1
DOIs
Publication statusPublished - 2002 Mar 1
Event17th Annual Conference on Magnet Technology - Geneva, Switzerland
Duration: 2001 Sep 242001 Sep 28

Keywords

  • Cu-Nb
  • High strength
  • In situ
  • Nb3Sn
  • Reinforcement
  • Stabilizer

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of '(Nb,Ti)<sub>3</sub>Sn superconducting wire with CuNb reinforcing stabilizer'. Together they form a unique fingerprint.

  • Cite this

    Sakamoto, H., Endoh, S., Nagasu, Y., Wada, K., Kimura, A., Meguro, S. I., Awaji, S., Watanabe, K., & Motokawa, M. (2002). (Nb,Ti)3Sn superconducting wire with CuNb reinforcing stabilizer. IEEE Transactions on Applied Superconductivity, 12(1), 1067-1070. https://doi.org/10.1109/TASC.2002.1018585