Multiple SAW resonance sensing through one communication channel with multiple phase detectors

Yoshinori Takizawa; Takayuki Shibata; Shinji Kashiwada; Yasuo Yamamoto; Masayoshi Esashi; Shuji Tanaka

doi:10.1109/FCS.2015.7138784

Multiple SAW resonance sensing through one communication channel with multiple phase detectors

Yoshinori Takizawa, Takayuki Shibata, Shinji Kashiwada, Yasuo Yamamoto, Masayoshi Esashi, Shuji Tanaka

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3 Citations (Scopus)

Abstract

SAW device is widely used in the various passive sensing application such as temperature, mechanical force and other various measurements. The SAW devices have relatively high the temperature dependency, thus in some applications, the multiple SAW sensors are used for the temperature compensation. In such a case, the communication between the sensor and controller is highly important. This paper describes the one channel communication with multiple SAW resonators for the measurement applications. The final target of this research is to investigate the near magnetic field wireless passive sensing capability using the continuous wave for higher response speed.

Original language	English
Title of host publication	2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	17-20
Number of pages	4
ISBN (Electronic)	9781479988662
DOIs	https://doi.org/10.1109/FCS.2015.7138784
Publication status	Published - 2015 Jun 29
Externally published	Yes
Event	2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Denver, United States Duration: 2015 Apr 12 → 2015 Apr 16

Publication series

Name	2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings

Other

Other	2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015
Country/Territory	United States
City	Denver
Period	15/4/12 → 15/4/16

Keywords

Passive measurement
Phase detection
Resonator
SAW
TCF

ASJC Scopus subject areas

Computer Networks and Communications
Signal Processing

Access to Document

10.1109/FCS.2015.7138784

Cite this

Takizawa, Y., Shibata, T., Kashiwada, S., Yamamoto, Y., Esashi, M., & Tanaka, S. (2015). Multiple SAW resonance sensing through one communication channel with multiple phase detectors. In 2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings (pp. 17-20). [7138784] (2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/FCS.2015.7138784

Multiple SAW resonance sensing through one communication channel with multiple phase detectors. / Takizawa, Yoshinori; Shibata, Takayuki; Kashiwada, Shinji; Yamamoto, Yasuo; Esashi, Masayoshi; Tanaka, Shuji.

2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2015. p. 17-20 7138784 (2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Takizawa, Y, Shibata, T, Kashiwada, S, Yamamoto, Y, Esashi, M & Tanaka, S 2015, Multiple SAW resonance sensing through one communication channel with multiple phase detectors. in 2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings., 7138784, 2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings, Institute of Electrical and Electronics Engineers Inc., pp. 17-20, 2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015, Denver, United States, 15/4/12. https://doi.org/10.1109/FCS.2015.7138784

Takizawa Y, Shibata T, Kashiwada S, Yamamoto Y, Esashi M, Tanaka S. Multiple SAW resonance sensing through one communication channel with multiple phase detectors. In 2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2015. p. 17-20. 7138784. (2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings). https://doi.org/10.1109/FCS.2015.7138784

Takizawa, Yoshinori ; Shibata, Takayuki ; Kashiwada, Shinji ; Yamamoto, Yasuo ; Esashi, Masayoshi ; Tanaka, Shuji. / Multiple SAW resonance sensing through one communication channel with multiple phase detectors. 2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2015. pp. 17-20 (2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings).

@inproceedings{a825a108faa94e1e806471ce2fdf925c,

title = "Multiple SAW resonance sensing through one communication channel with multiple phase detectors",

abstract = "SAW device is widely used in the various passive sensing application such as temperature, mechanical force and other various measurements. The SAW devices have relatively high the temperature dependency, thus in some applications, the multiple SAW sensors are used for the temperature compensation. In such a case, the communication between the sensor and controller is highly important. This paper describes the one channel communication with multiple SAW resonators for the measurement applications. The final target of this research is to investigate the near magnetic field wireless passive sensing capability using the continuous wave for higher response speed.",

keywords = "Passive measurement, Phase detection, Resonator, SAW, TCF",

author = "Yoshinori Takizawa and Takayuki Shibata and Shinji Kashiwada and Yasuo Yamamoto and Masayoshi Esashi and Shuji Tanaka",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.; 2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 ; Conference date: 12-04-2015 Through 16-04-2015",

year = "2015",

month = jun,

day = "29",

doi = "10.1109/FCS.2015.7138784",

language = "English",

series = "2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "17--20",

booktitle = "2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings",

}

TY - GEN

T1 - Multiple SAW resonance sensing through one communication channel with multiple phase detectors

AU - Takizawa, Yoshinori

AU - Shibata, Takayuki

AU - Kashiwada, Shinji

AU - Yamamoto, Yasuo

AU - Esashi, Masayoshi

AU - Tanaka, Shuji

PY - 2015/6/29

Y1 - 2015/6/29

N2 - SAW device is widely used in the various passive sensing application such as temperature, mechanical force and other various measurements. The SAW devices have relatively high the temperature dependency, thus in some applications, the multiple SAW sensors are used for the temperature compensation. In such a case, the communication between the sensor and controller is highly important. This paper describes the one channel communication with multiple SAW resonators for the measurement applications. The final target of this research is to investigate the near magnetic field wireless passive sensing capability using the continuous wave for higher response speed.

AB - SAW device is widely used in the various passive sensing application such as temperature, mechanical force and other various measurements. The SAW devices have relatively high the temperature dependency, thus in some applications, the multiple SAW sensors are used for the temperature compensation. In such a case, the communication between the sensor and controller is highly important. This paper describes the one channel communication with multiple SAW resonators for the measurement applications. The final target of this research is to investigate the near magnetic field wireless passive sensing capability using the continuous wave for higher response speed.

KW - Passive measurement

KW - Phase detection

KW - Resonator

KW - SAW

KW - TCF

UR - http://www.scopus.com/inward/record.url?scp=84943239511&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84943239511&partnerID=8YFLogxK

U2 - 10.1109/FCS.2015.7138784

DO - 10.1109/FCS.2015.7138784

M3 - Conference contribution

AN - SCOPUS:84943239511

T3 - 2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings

SP - 17

EP - 20

BT - 2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2015 Joint Conference of the IEEE International Frequency Control Symposium and the European Frequency and Time Forum, FCS 2015

Y2 - 12 April 2015 through 16 April 2015

ER -

Multiple SAW resonance sensing through one communication channel with multiple phase detectors

Abstract

Publication series

Other

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this