Molecular-dynamics analysis of grain-boundary grooving in interconnect films with underlayers

T. Iwasaki, H. Miura

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

We have developed a molecular-dynamics technique for investigating migration-induced failures in interconnect films for ULSIs. This technique was used to simulate grain-boundary grooving in Al and Cu films. The simulations showed that the grain-boundary grooves are formed by atomic diffusion at the grain boundary. To clarify what kind of underlay material is effective in suppressing this diffusion, we calculated the dependence of groove depth on the kind of underlay material. The calculation showed that the groove depth of the Al film decreases in the order: Al/Ta, Al/W, and Al/TiN while that of the Cu film decreases in the order: Cu/TiN, Cu/Ta, and Cu/W. The adhesion strength of interface between the interconnect film and the underlay material increases in the same order as the groove depth decreases. It is thus concluded that underlayer materials with strong adhesion to the interconnect films are effective in suppressing diffusion and grain-boundary grooving.

Original languageEnglish
Pages (from-to)551-557
Number of pages7
JournalCMES - Computer Modeling in Engineering and Sciences
Volume4
Issue number5
Publication statusPublished - 2003 Dec 1
Externally publishedYes

Keywords

  • Adhesion
  • Migration
  • Molecular dynamics

ASJC Scopus subject areas

  • Software
  • Modelling and Simulation
  • Computer Science Applications

Fingerprint Dive into the research topics of 'Molecular-dynamics analysis of grain-boundary grooving in interconnect films with underlayers'. Together they form a unique fingerprint.

  • Cite this