Microstructures and properties in aluminum nitride-titanium nitride composite ceramics

Masahiko Tajika, Hideaki Matsubara, William Rafaniello

Research output: Contribution to journalArticlepeer-review

18 Citations (Scopus)

Abstract

Aluminum nitride-titanium nitride (AlN-TiN) composites (TiN content; 0, 5 and 10 vol%) were prepared using mixtures of fine AlN and TiN powders. Pressureless sintering of the AlN-TiN powder mixtures was done at 1850 °C for 1 to 20 h. using yttrium oxide powder as a sintering aid. Sintered samples achieved almost full density. While AlN grains grew isotropically with sintering time, TiN particles in the composite maintained their small and nearly round shape. The TiN grains were present at both grain boundary and within AlN grains. Heat treatment of these composites caused both microstructural change and improvements in thermal diffusivity. Inhibition of AlN grain growth was greatest for the 10 vol.% TiN-AlN composites.

Original languageEnglish
Pages (from-to)139-144
Number of pages6
JournalMaterials Letters
Volume41
Issue number3
DOIs
Publication statusPublished - 1999 Nov
Externally publishedYes

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Microstructures and properties in aluminum nitride-titanium nitride composite ceramics'. Together they form a unique fingerprint.

Cite this