Microstructure and mechanical property of ultra-fine (ferrite + cementite) duplex structure in high carbon steel

T. Maki, T. Furuhara

Research output: Contribution to journalConference articlepeer-review

22 Citations (Scopus)

Abstract

The characteristics and mechanical properties of the (α+θ) microduplex structures formed by various thermomechanical processings were studied in an ultrahigh carbon steel (Fe-1.4Cr-1.0C). When the pearlite was austenitized in the (γ+θ) region, quenched and tempered at the temperature below AI, an (α+θ) microduplex structure in which most of α boundaries are of high-angle one is formed through the recovery of the fine (lath martensite + undissolved θ) mixture during tempering. Such (α+θ) microduplex structure with high-angle α boundaries exhibits superior superplasticity compared with those formed by the heavy warm rolling of pearlite, or by the annealing of heavily cold-rolled pearlite which contain higher fraction of low-angle α grain boundaries. Although the microduplex structures obtained various thermomechanical processings exhibit nearly the same tensile strength (about 900MPa), the ductility is markedly influenced by the nature of α grain boundaries. The specimens which contain large portion of high-angle α grain boundaries exhibit better ductility such as 25% in total elongation.

Original languageEnglish
Pages (from-to)19-26
Number of pages8
JournalMaterials Science Forum
Volume426-432
Issue number1
DOIs
Publication statusPublished - 2003 Jan 1
Externally publishedYes
EventThermec 2003 Processing and Manufacturing of Advanced Materials - Madrid, Spain
Duration: 2003 Jul 72003 Jul 11

Keywords

  • Ductility
  • Grain boundary
  • High carbon steel
  • Microduplex structure
  • Strength
  • Superplasticity

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Microstructure and mechanical property of ultra-fine (ferrite + cementite) duplex structure in high carbon steel'. Together they form a unique fingerprint.

Cite this