Microstructure and mechanical properties of austempered medium carbon steels

Takeshi Suzuki, Yoshiki Ono, Goro Miyamoto, Tadashi Furuhara

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Microstructures and mechanical properties for medium carbon steels including practical spring steels austempered at 400°C and 300°C were investigated. The larger strain was applied, the larger the fraction of retained au stem te became martensite through strain induced transformation. 0.2% proof stress was increased by the increase of the fraction of bainitic ferrite. Uniform elongation was increased by increasing the fraction of retained austenite. Good strength-ductility balance with tensile stress over 1800MPa for high strength spring was achieved in austempered SUP12 at 300°C composed of three phases of retained austenite, martensite and lower bainite.

Original languageEnglish
Pages (from-to)26-33
Number of pages8
JournalTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
Volume97
Issue number1
DOIs
Publication statusPublished - 2011 May 13

Keywords

  • Austempering
  • Bainite
  • Martensite
  • Mechanical property
  • Medium carbon steel
  • Retained austenite
  • Spring steel

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Physical and Theoretical Chemistry
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Microstructure and mechanical properties of austempered medium carbon steels'. Together they form a unique fingerprint.

  • Cite this