Microstructural evolution of the surface of Mg-Al-based alloy by hydrogen treatment

Atsunori Kamegawa, Takanobu Miyashita, Hiroyuki Ogasawara, Hitoshi Takamura, Masuo Okada

Research output: Contribution to journalConference articlepeer-review

3 Citations (Scopus)

Abstract

The present paper describes the development of ultra-fine grains on the surface of AZ31 alloys caused by hydrogenation and dehydrogenation treatment, so-called HDDR process. Upon hydrogenation process, disproportionation reaction occurred in forming of MgH2, Mg0.42Al0.58, and Al phases. In the following desorption process, the three phases were re-solved into the AZ31 alloy. As a result of the HDDR phenomena, the grain size of AZ31 alloy powders was reduced down to about 100 nm after the heat treatment at 350 °C under a hydrogen pressure of 7 MPa for 24 h. The grain size tended to be increased with increasing process temperatures. In addition, the HDDR process was also applied to AZ31 alloy plates. By the HDDR process at 450 °C, the grain size was reduced to less than 500 nm, where hydrogenated layer thickness was limited to be in the range of about 20 μm from the surface. The Vickers hardness of AZ31 alloy plates was increased from 51.9 to 59.4 by HDDR-treatment.

Original languageEnglish
Pages (from-to)931-936
Number of pages6
JournalMaterials Science Forum
Volume419-422
Issue numberII
DOIs
Publication statusPublished - 2003
EventProceedings of the Second Osaka International Conference on Platform Science and Technology for Advanced Magnesium Alloys 2003 - Osaka, Japan
Duration: 2003 Jan 262003 Jan 30

Keywords

  • AZ31
  • Gas-solid reactions
  • Grain-size refinement
  • HDDR phenomena
  • Hydrogen
  • Magnesium
  • Mg-Al Alloy

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Microstructural evolution of the surface of Mg-Al-based alloy by hydrogen treatment'. Together they form a unique fingerprint.

Cite this