Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion

Murat Isik, Mitsuo Niinomi, Ken Cho, Masaaki Nakai, Huihong Liu, Hakan Yilmazer, Zenji Horita, Shigeo Sato, Takayuki Narushima

Research output: Contribution to journalArticle

12 Citations (Scopus)

Abstract

The effects of severe plastic deformation through high-pressure torsion (HPT) on the microstructure and tensile properties of a biomedical Co-Cr-Mo (CCM) alloy were investigated. The microstructure was examined as a function of torsional rotation number, N and equivalent strain, εeq in the HPT processing. Electron backscatter diffraction analysis (EBSD) shows that a strain-induced martensitic transformation occurs by the HPT processing. Grain diameter decreases with increasing εeq, and the HPT-processed alloy (CCMHPT) for εeq=45 exhibits an average grain diameter of 47nm, compared to 70μm for the CCM alloy before HPT processing. Blurred and wavy grain boundaries with low-angle of misorientation in the CCMHPT sample for εeq<45 become better-defined grain boundaries with high-angle of misorientation after HPT processing for εeq=45. Kernel average misorientation (KAM) maps from EBSD indicate that KAM inside grains increases with εeq for εeq<45, and then decreases for εeq=45. The volume fraction of the ε (hcp) phase in the CCMHPT samples slightly increases at εeq=9, and decreases at εeq=45. In addition, the strength of the CCMHPT samples increases at εeq=9, and then decrease at εeq=45. The decrease in the strength is attributed to the decrease in the volume fraction of ε phase, annihilation of dislocations, and decrease in strain in the CCMHPT sample processed at εeq=45 by HPT.

Original languageEnglish
Pages (from-to)226-235
Number of pages10
JournalJournal of the Mechanical Behavior of Biomedical Materials
Volume59
DOIs
Publication statusPublished - 2016 Jun 1

Keywords

  • Biomaterials
  • Co-Cr-Mo alloys
  • Grain refinement
  • High-pressure torsion
  • Martensitic phase transformation

ASJC Scopus subject areas

  • Biomaterials
  • Biomedical Engineering
  • Mechanics of Materials

Fingerprint Dive into the research topics of 'Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion'. Together they form a unique fingerprint.

  • Cite this