Microscopic mechanism of plastic deformation in a polycrystalline Co-Cr-Mo alloy with a single hcp phase

Hiroaki Matsumoto, Yuichiro Koizumi, Tetsuya Ohashi, Byong Soo Lee, Yunping Li, Akihiko Chiba

Research output: Contribution to journalArticle

20 Citations (Scopus)

Abstract

A Co-Cr-Mo alloy with a single ε (hexagonal close-packed, hcp) phase exhibits excellent tensile properties with a 0.2% proof stress of 630 MPa, an ultimate tensile stress of 1072 MPa and an elongation to fracture of 38.3%. The dominant deformation modes are basal 〈a〉 slip and prismatic 〈a〉 slip, and the apparent respective critical resolved shear stresses at room temperature are calculated to be 184 and 211 MPa. This simultaneous activation of both 〈a〉 slips can be explained in terms of the lattice constant ratio c/a of 1.610. There is a tendency for the geometrically necessary dislocations (GNDs) to accumulate at grain boundaries, and the magnitude of this GND accumulation at a particular boundary is dependent on its character. Numerical analysis using a dislocation-model-based strain gradient crystal plasticity calculation makes it possible to characterize the distributions of dislocation density, local stress and local strain in the polycrystalline ε Co-Cr-Mo alloy, and the calculation is largely consistent with the experimental results. This simulation reveals that the activity of the prismatic 〈〉 slip in addition to the basal 〈a〉 slip contributes to the stress relaxation at the boundary. For this reason, excellent tensile ductility is obtained in the polycrystalline ε Co-Cr-Mo alloy.

Original languageEnglish
Pages (from-to)1-11
Number of pages11
JournalActa Materialia
Volume64
DOIs
Publication statusPublished - 2014 Feb 1

Keywords

  • Cobalt-chromium-molybdenum alloy
  • Crystal plasticity analysis
  • Deformation mode
  • Dislocation slip
  • Geometrically necessary dislocations

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Polymers and Plastics
  • Metals and Alloys

Fingerprint Dive into the research topics of 'Microscopic mechanism of plastic deformation in a polycrystalline Co-Cr-Mo alloy with a single hcp phase'. Together they form a unique fingerprint.

  • Cite this