Mechanical property of single phase Co-Ni-Cr-Mo based superalloy produced by cold working and recrystallization heat treatment

Jun Kyung Sung, Gil Su Hong, Won Yong Kim, Mok Soon Kim, Sun Keun Hwang, Akihiko Chiba

Research output: Contribution to journalConference articlepeer-review

6 Citations (Scopus)

Abstract

Mechanical property of carbon-free Co-Ni-Cr-Mo based superalloy was investigated at room temperature and at 943 K. Cold working and subsequent recrystallization heat treatment was carried out to produce an equiaxed grain structure. The average grain size was controlled to 28 and 238 μm in order to understand the effect of grain size on mechanical property and flow behavior. At room temperature and 943 K, 0.2% offset yield strength increased with decreasing grain size to exhibit grain size dependence. At 943 K, a specimen with the average grain size of 28 μm showed higher yield strength than that obtained with a specimen having the average grain size of 238 μm. A steady-state like behavior leading to an extensive ductility was observed in the fine-grained specimen. {111 }〈112〉 deformation twinning was found to correlate with the steady-state like behavior in the true stress-true strain curve. It was suggested that grain refinement is favor to enhance the fracture strength and allow the deformation twinning to occur.

Original languageEnglish
Pages (from-to)573-576
Number of pages4
JournalMaterials Science Forum
Volume449-452
Issue numberI
DOIs
Publication statusPublished - 2004
Externally publishedYes
EventDesigning, Processing and Properties of Advanced Engineering Materials: Proceedings on the 3rd International Symposium on Designing, Processing and Properties of Advanced Engineering Materials - Jeju Island, Korea, Republic of
Duration: 2003 Nov 52003 Nov 8

Keywords

  • Co-Based Alloys
  • Cold Working
  • Deformation Twinning
  • Mechanical Property
  • Recrystallization
  • Superalloy

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Mechanical property of single phase Co-Ni-Cr-Mo based superalloy produced by cold working and recrystallization heat treatment'. Together they form a unique fingerprint.

Cite this