Mechanical properties of SiC–NbB2 eutectic composites by in situ spark plasma sintering

Dmytro Demirskyi, Oleg Vasylkiv

Research output: Contribution to journalArticlepeer-review

10 Citations (Scopus)

Abstract

The in situ synthesis/consolidation of SiC–NbB2 eutectic composites by spark plasma sintering (SPS) is reported. The SPS processing resulted in composites with eutectic structure and hardness of 25–31 GPa. Screening of experimental data suggested that eutectic composition in this system is 37–39 vol% NbB2. The temperature dependence of the flexural strength of the SiC–NbB2 system has been reported for the first time. Ceramic composites with eutectic structure exhibited an unchanged strength of 610±25 MPa at room temperature and at 1600 °C. Further increase in testing temperature, i.e. up to 1900 °C, was accompanied by a slight decrease in strength. Such behavior was attributed to increased contribution of the plastic deformation to the fracture process.

Original languageEnglish
Pages (from-to)19372-19385
Number of pages14
JournalCeramics International
Volume42
Issue number16
DOIs
Publication statusPublished - 2016 Dec 1
Externally publishedYes

Keywords

  • Hardness
  • SiC–NbB composites
  • Spark plasma sintering
  • Strength
  • UHTC

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Process Chemistry and Technology
  • Surfaces, Coatings and Films
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Mechanical properties of SiC–NbB<sub>2</sub> eutectic composites by in situ spark plasma sintering'. Together they form a unique fingerprint.

Cite this