Mechanical properties and grindability of dental cast Ti-Nb alloys

Masafumi Kikuchi, Masatoshi Takahashi, Osamu Okuno

Research output: Contribution to journalArticlepeer-review

57 Citations (Scopus)

Abstract

Aiming at developing a dental titanium alloy with better mechanical properties and machinability than unalloyed titanium, a series of Ti-Nb alloys with Nb concentrations up to 30% was made. They were cast into magnesia-based molds using a dental casting machine and the mechanical properties and grindability of the castings were examined. The hardness of the alloys with Nb concentrations of 5% and above was significantly higher than that of titanium. The yield strength and tensile strength of the alloys with Nb concentrations of 10% and above were significantly higher than those of titanium, while the elongation was significantly lower. A small addition of niobium to titanium did not contribute to improving the grindability of titanium. The Ti-30%Nb alloy exhibited significantly better grindability at low grinding speed with higher hardness, strength, and Young's modulus than titanium, presumably due to precipitation of the w phase in the β matrix.

Original languageEnglish
Pages (from-to)328-342
Number of pages15
JournalDental materials journal
Volume22
Issue number3
DOIs
Publication statusPublished - 2003 Sep

Keywords

  • Grindability
  • Mechanical property
  • Titanium alloy

ASJC Scopus subject areas

  • Ceramics and Composites
  • Dentistry(all)

Fingerprint Dive into the research topics of 'Mechanical properties and grindability of dental cast Ti-Nb alloys'. Together they form a unique fingerprint.

Cite this