Mechanical Properdes of TiC0.5N0.5-Mo2C-Ni Alloy in Reladon to Mo2C Content

Hisashi Suzuki; Hideaki Matsubara; Masaya Asano

doi:10.2497/jjspm.32.301

Mechanical Properdes of TiC_0.5N_0.5-Mo₂C-Ni Alloy in Reladon to Mo₂C Content

Hisashi Suzuki, Hideaki Matsubara, Masaya Asano

Research output: Contribution to journal › Article › peer-review

Abstract

TiC_0.5N_0.5-(2∼18)vol%Mo₂C-16.4 vol%Ni alloys were sintered and HIP-treated at 1723 K, and then resintered at 1823 K. The microstructure, transverse-rupture strength at room temperature and 1273 K, etc. of the alloys were studied in relation to Mo₂C content. The TRS at room temperature of the resintered alloy increased with increasing Mo₂C content and attained a maximum with the Mo₂C content of about 10%. The TRS and resistance to deformation at 1273 K became higher with increasing Mo₂C content. The discussions on these results were given.

Original language	English
Pages (from-to)	301-304
Number of pages	4
Journal	Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
Volume	32
Issue number	8
DOIs	https://doi.org/10.2497/jjspm.32.301
Publication status	Published - 1985
Externally published	Yes

ASJC Scopus subject areas

Mechanical Engineering
Industrial and Manufacturing Engineering
Metals and Alloys
Materials Chemistry

Access to Document

10.2497/jjspm.32.301

Cite this

@article{e102e5bce24e445998fae7c719da0361,

title = "Mechanical Properdes of TiC0.5N0.5-Mo2C-Ni Alloy in Reladon to Mo2C Content",

abstract = "TiC0.5N0.5-(2∼18)vol%Mo2C-16.4 vol%Ni alloys were sintered and HIP-treated at 1723 K, and then resintered at 1823 K. The microstructure, transverse-rupture strength at room temperature and 1273 K, etc. of the alloys were studied in relation to Mo2C content. The TRS at room temperature of the resintered alloy increased with increasing Mo2C content and attained a maximum with the Mo2C content of about 10%. The TRS and resistance to deformation at 1273 K became higher with increasing Mo2C content. The discussions on these results were given.",

author = "Hisashi Suzuki and Hideaki Matsubara and Masaya Asano",

year = "1985",

doi = "10.2497/jjspm.32.301",

language = "English",

volume = "32",

pages = "301--304",

journal = "Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy",

issn = "0532-8799",

publisher = "Funtai Funamtsu Yakin Kyokai/Japan Soc. of Powder Metallurgy",

number = "8",

}

TY - JOUR

T1 - Mechanical Properdes of TiC0.5N0.5-Mo2C-Ni Alloy in Reladon to Mo2C Content

AU - Suzuki, Hisashi

AU - Matsubara, Hideaki

AU - Asano, Masaya

PY - 1985

Y1 - 1985

N2 - TiC0.5N0.5-(2∼18)vol%Mo2C-16.4 vol%Ni alloys were sintered and HIP-treated at 1723 K, and then resintered at 1823 K. The microstructure, transverse-rupture strength at room temperature and 1273 K, etc. of the alloys were studied in relation to Mo2C content. The TRS at room temperature of the resintered alloy increased with increasing Mo2C content and attained a maximum with the Mo2C content of about 10%. The TRS and resistance to deformation at 1273 K became higher with increasing Mo2C content. The discussions on these results were given.

AB - TiC0.5N0.5-(2∼18)vol%Mo2C-16.4 vol%Ni alloys were sintered and HIP-treated at 1723 K, and then resintered at 1823 K. The microstructure, transverse-rupture strength at room temperature and 1273 K, etc. of the alloys were studied in relation to Mo2C content. The TRS at room temperature of the resintered alloy increased with increasing Mo2C content and attained a maximum with the Mo2C content of about 10%. The TRS and resistance to deformation at 1273 K became higher with increasing Mo2C content. The discussions on these results were given.

UR - http://www.scopus.com/inward/record.url?scp=0022151863&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0022151863&partnerID=8YFLogxK

U2 - 10.2497/jjspm.32.301

DO - 10.2497/jjspm.32.301

M3 - Article

AN - SCOPUS:0022151863

VL - 32

SP - 301

EP - 304

JO - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

JF - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

SN - 0532-8799

IS - 8

ER -

Mechanical Properdes of TiC_0.5N_0.5-Mo₂C-Ni Alloy in Reladon to Mo₂C Content

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this