Abstract
To improve the fatigue strength and resistance to stress corrosion cracking, peening is the effective technique because of the introduction of compressive residual stress. As penetration depth can varies with frequency and electromagnetic properties are varied with the induced stress, an electromagnetic method is proper to evaluate the peening efficiency nondestructively. The piezoresistive effect and Villari effect cause the variation of electromagnetic properties like as the electrical resistivity with the introduction of stress. It was reported that the electromagnetic properties were varied with processing time of peening and depth where the compressive residual stress was introduced. In this paper, to establish the evaluating method of peening intensity and homogeneity after peening, austenitic stainless steel, Japanese Industrial Standards (JIS) SUS316L treated by cavitation peening which causes little variation of surface roughness and microstructure were evaluated by means of an eddy current method with coil scanning. In results, the peening intensity can be evaluated by the eddy current method.
Original language | English |
---|---|
Pages (from-to) | 656-659 |
Number of pages | 4 |
Journal | Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A |
Volume | 78 |
Issue number | 789 |
DOIs | |
Publication status | Published - 2012 |
Keywords
- Eddy Current
- Electromagnetic Measurement
- Residual Stress
- Scanning
- Surface Improvement
ASJC Scopus subject areas
- Materials Science(all)
- Mechanics of Materials
- Mechanical Engineering