Measurement and uncertainty analysis of a precision V-shaped ceramic part

Masami Kogure; Hiraku Matsukuma; Ryo Kobayashi; Yuki Shimizu; Wei Gao

doi:10.1109/AMCON.2018.8614901

Measurement and uncertainty analysis of a precision V-shaped ceramic part

Masami Kogure, Hiraku Matsukuma, Ryo Kobayashi, Yuki Shimizu, Wei Gao

ENG - Finemechanics

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Abstract

This paper presents measurement of a precision ceramic part having V-shaped surfaces to be measured. Machining of a ceramic part is attracting attentions due to the superior characteristics such as a low thermal expansion coefficient or a high stiffness when being employed in fabrication equipments. Meanwhile, due to the difficulty of machining ceramic part, in general, it is necessary to carry out compensation machining with off-machine measurement. In this paper, aiming to establish a method to evaluate the uncertainty of measurement of an angle between two surfaces in a ceramic part, computer simulation based on the Monte-Carlo method is carried out, while employing data obtained from the measurement carried out by using a commercially available coordinate measuring machine (CMM).

Original language	English
Title of host publication	Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018
Editors	Teen-Hang Meen
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	30-31
Number of pages	2
ISBN (Electronic)	9781538656099
DOIs	https://doi.org/10.1109/AMCON.2018.8614901
Publication status	Published - 2019 Jan 16
Event	2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018 - Yunlin, Taiwan, Province of China Duration: 2018 Nov 16 → 2018 Nov 18

Publication series

Name	Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018

Conference

Conference	2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018
Country	Taiwan, Province of China
City	Yunlin
Period	18/11/16 → 18/11/18

Keywords

Angle measurement
CMM uncertainty
Coordinate measurement machine
Monte-Carlo method

ASJC Scopus subject areas

Biomedical Engineering
Mechanics of Materials
Safety, Risk, Reliability and Quality
Management, Monitoring, Policy and Law
Education
Fluid Flow and Transfer Processes
Industrial and Manufacturing Engineering

Access to Document

10.1109/AMCON.2018.8614901

Fingerprint Dive into the research topics of 'Measurement and uncertainty analysis of a precision V-shaped ceramic part'. Together they form a unique fingerprint.

Cite this

Kogure, M., Matsukuma, H., Kobayashi, R., Shimizu, Y., & Gao, W. (2019). Measurement and uncertainty analysis of a precision V-shaped ceramic part. In T-H. Meen (Ed.), Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018 (pp. 30-31). [8614901] (Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/AMCON.2018.8614901

Measurement and uncertainty analysis of a precision V-shaped ceramic part. / Kogure, Masami; Matsukuma, Hiraku; Kobayashi, Ryo; Shimizu, Yuki ; Gao, Wei.

Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018. ed. / Teen-Hang Meen. Institute of Electrical and Electronics Engineers Inc., 2019. p. 30-31 8614901 (Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Kogure, M, Matsukuma, H, Kobayashi, R, Shimizu, Y & Gao, W 2019, Measurement and uncertainty analysis of a precision V-shaped ceramic part. in T-H Meen (ed.), Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018., 8614901, Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018, Institute of Electrical and Electronics Engineers Inc., pp. 30-31, 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018, Yunlin, Taiwan, Province of China, 18/11/16. https://doi.org/10.1109/AMCON.2018.8614901

Kogure M, Matsukuma H, Kobayashi R, Shimizu Y , Gao W. Measurement and uncertainty analysis of a precision V-shaped ceramic part. In Meen T-H, editor, Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018. Institute of Electrical and Electronics Engineers Inc. 2019. p. 30-31. 8614901. (Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018). https://doi.org/10.1109/AMCON.2018.8614901

Kogure, Masami ; Matsukuma, Hiraku ; Kobayashi, Ryo ; Shimizu, Yuki ; Gao, Wei. / Measurement and uncertainty analysis of a precision V-shaped ceramic part. Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018. editor / Teen-Hang Meen. Institute of Electrical and Electronics Engineers Inc., 2019. pp. 30-31 (Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018).

@inproceedings{8fcc3fa1c03340778e1ea43999641a59,

title = "Measurement and uncertainty analysis of a precision V-shaped ceramic part",

abstract = "This paper presents measurement of a precision ceramic part having V-shaped surfaces to be measured. Machining of a ceramic part is attracting attentions due to the superior characteristics such as a low thermal expansion coefficient or a high stiffness when being employed in fabrication equipments. Meanwhile, due to the difficulty of machining ceramic part, in general, it is necessary to carry out compensation machining with off-machine measurement. In this paper, aiming to establish a method to evaluate the uncertainty of measurement of an angle between two surfaces in a ceramic part, computer simulation based on the Monte-Carlo method is carried out, while employing data obtained from the measurement carried out by using a commercially available coordinate measuring machine (CMM).",

keywords = "Angle measurement, CMM uncertainty, Coordinate measurement machine, Monte-Carlo method",

author = "Masami Kogure and Hiraku Matsukuma and Ryo Kobayashi and Yuki Shimizu and Wei Gao",

year = "2019",

month = jan,

day = "16",

doi = "10.1109/AMCON.2018.8614901",

language = "English",

series = "Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "30--31",

editor = "Teen-Hang Meen",

booktitle = "Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018",

note = "2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018 ; Conference date: 16-11-2018 Through 18-11-2018",

}

TY - GEN

T1 - Measurement and uncertainty analysis of a precision V-shaped ceramic part

AU - Kogure, Masami

AU - Matsukuma, Hiraku

AU - Kobayashi, Ryo

AU - Shimizu, Yuki

AU - Gao, Wei

PY - 2019/1/16

Y1 - 2019/1/16

N2 - This paper presents measurement of a precision ceramic part having V-shaped surfaces to be measured. Machining of a ceramic part is attracting attentions due to the superior characteristics such as a low thermal expansion coefficient or a high stiffness when being employed in fabrication equipments. Meanwhile, due to the difficulty of machining ceramic part, in general, it is necessary to carry out compensation machining with off-machine measurement. In this paper, aiming to establish a method to evaluate the uncertainty of measurement of an angle between two surfaces in a ceramic part, computer simulation based on the Monte-Carlo method is carried out, while employing data obtained from the measurement carried out by using a commercially available coordinate measuring machine (CMM).

AB - This paper presents measurement of a precision ceramic part having V-shaped surfaces to be measured. Machining of a ceramic part is attracting attentions due to the superior characteristics such as a low thermal expansion coefficient or a high stiffness when being employed in fabrication equipments. Meanwhile, due to the difficulty of machining ceramic part, in general, it is necessary to carry out compensation machining with off-machine measurement. In this paper, aiming to establish a method to evaluate the uncertainty of measurement of an angle between two surfaces in a ceramic part, computer simulation based on the Monte-Carlo method is carried out, while employing data obtained from the measurement carried out by using a commercially available coordinate measuring machine (CMM).

KW - Angle measurement

KW - CMM uncertainty

KW - Coordinate measurement machine

KW - Monte-Carlo method

UR - http://www.scopus.com/inward/record.url?scp=85062210708&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85062210708&partnerID=8YFLogxK

U2 - 10.1109/AMCON.2018.8614901

DO - 10.1109/AMCON.2018.8614901

M3 - Conference contribution

AN - SCOPUS:85062210708

T3 - Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018

SP - 30

EP - 31

BT - Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018

A2 - Meen, Teen-Hang

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018

Y2 - 16 November 2018 through 18 November 2018

ER -