Magneto-transport and microstructure of Co2Fe(Ga 0.5Ge0.5)/Cu lateral spin valves prepared by top-down microfabrication process

I. Ikhtiar, S. Kasai, A. Itoh, Y. K. Takahashi, T. Ohkubo, S. Mitani, K. Hono

Research output: Contribution to journalArticlepeer-review

29 Citations (Scopus)


Heusler alloy-based lateral spin valves with ohmic contacts are prepared for the Co2Fe(Ga0.5Ge0.5)/Cu system by means of the top-down microfabrication process. The magneto-transport and microstructure are characterized to investigate the influence of the microfabrication route on the spin dependent transport of lateral spin valves systematically. A large non-local spin signal (?RS) of 17.3mΩ is observed at room temperature, which is attributed to the highly spin-polarized Co 2Fe(Ga0.5Ge0.5) ferromagnet and the clean Co2Fe(Ga0.5Ge0.5)/Cu interfaces confirmed by transmission electron microscopy. Based on the general expression of one-dimensional spin diffusion model, we discuss the importance of interfacial spin polarization in Heusler alloy-based lateral spin valves.

Original languageEnglish
Article number173912
JournalJournal of Applied Physics
Issue number17
Publication statusPublished - 2014 May 7
Externally publishedYes

ASJC Scopus subject areas

  • Physics and Astronomy(all)


Dive into the research topics of 'Magneto-transport and microstructure of Co<sub>2</sub>Fe(Ga <sub>0.5</sub>Ge<sub>0.5</sub>)/Cu lateral spin valves prepared by top-down microfabrication process'. Together they form a unique fingerprint.

Cite this