Magnetic anisotropy of plastically deformed low-carbon steel

O. Stupakov, T. Uchimoto, T. Takagi

Research output: Contribution to journalArticlepeer-review

28 Citations (Scopus)

Abstract

Macroscopic hysteresis and local Barkhausen noise techniques were used for the comprehensive magnetic investigation of structural low-carbon steel subjected to uniaxial plastic tension. Scattering of the measured magnetic parameters was substantial within the Lüders band region with stabilization at higher strains. Compressive residual stresses in the deformation direction formed a hard magnetization axis with intriguing two-phase remagnetization. The magnetic parameters had the highest sensitivity to strain in this direction. They changed as cos2 with rotation to the perpendicular easy magnetization axis, where the magnetic sensitivity was the lowest. The relation between the deformed steel microstructure (dislocation and residual stress patterns) and the obtained magnetic behaviour is interpreted. The applicability of the examined techniques for the non-destructive characterization of steel degradation is discussed.

Original languageEnglish
Article number195003
JournalJournal of Physics D: Applied Physics
Volume43
Issue number19
DOIs
Publication statusPublished - 2010

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Acoustics and Ultrasonics
  • Surfaces, Coatings and Films

Fingerprint Dive into the research topics of 'Magnetic anisotropy of plastically deformed low-carbon steel'. Together they form a unique fingerprint.

Cite this