Low springback and low Young’s modulus in Ti29Nb13Ta4.6Zr alloy modified by Mo addition

Qiang Li, Qiang Qi, Junjie Li, Masaaki Nakai, Mitsuo Niinomi, Yuichiro Koizumi, Daixiu Wei, Kenta Yamanaka, Takayoshi Nakano, Akihiko Chiba, Xuyan Liu, Deng Pan

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

Deformation-induced higher Young’s modulus can satisfy the contradictory requirements of Ti alloys for spinal-fixation applications, which demand a high Young’s modulus to reduce springback during operations and a low Young’s modulus to prevent stress shielding effect for patients after surgeries. In this study, TNTZ(1, 3, 5)Mo are designed by adding Mo and Ti to Ti29Nb13Ta4.6Zr (TNTZ) in order to maintain low initial Young’s modulus and achieve low springback. All the solutionized alloys show single ¢ phase with increasing the ¢ stability by Mo addition. They show low Young’s moduli less than 65 GPa, similar ultimate tensile strength of 650 MPa and elongation around 20%. The springback of TNTZ3Mo and TNTZ5Mo is lower than that of TNTZ and TNTZ1Mo owing to their more stable ¢ phase. After cold rolling, TNTZ3Mo shows the largest increasing ratio of 25% in Young’s modulus and the highest ultimate tensile strength owning to the appearance of deformation-induced ½ phase. With the low initial Young’s modulus of 59 GPa, TNTZ3Mo is a potential candidate to make the spinal rods in spinal fixation devices.

Original languageEnglish
Pages (from-to)1755-1762
Number of pages8
JournalMaterials Transactions
Volume60
Issue number9
DOIs
Publication statusPublished - 2019
Externally publishedYes

Keywords

  • Biomaterial
  • Deformation mechanism
  • Mechanical property
  • Springback
  • Titanium alloy

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Low springback and low Young’s modulus in Ti29Nb13Ta4.6Zr alloy modified by Mo addition'. Together they form a unique fingerprint.

Cite this