Low-power multiple-valued current-mode logic using substrate bias control

Akira Mochizuki, Takahiro Hanyu

Research output: Contribution to journalArticlepeer-review

4 Citations (Scopus)

Abstract

A new multiple-valued current-mode (MVCM) logic circuit using substrate bias control is proposed for low-power VLSI systems at higher clock frequency. Since a multi-level threshold value is represented as a threshold voltage of an MOS transistor, a voltage comparator is realized by a single MOS transistor. As a result, two basic components, a comparator and an output generator in the MVCM logic circuit can be merged into a single MOS differential-pair circuit where the threshold voltages of MOS transistors are controlled by substrate biasing. Moreover, the leakage current is also reduced using substrate bias control. As a typical example of an arithmetic circuit, a radix-2 signed-digit full adder using the proposed circuit is implemented in a 0.18- μm CMOS technology. Its dynamic and static power dissipations are reduced to about 79 percent and 14 percent, respectively, in comparison with those of the corresponding binary CMOS implementation at the supply voltage of 1.8 V and the clock frequency of 500MHz.

Original languageEnglish
Pages (from-to)582-588
Number of pages7
JournalIEICE Transactions on Electronics
VolumeE87-C
Issue number4
Publication statusPublished - 2004 Apr

Keywords

  • Differential-pair circuit
  • Dynamic power dissipation
  • Leakage current
  • Low-power VLSI
  • Substrate bias control
  • Threshold voltage

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Low-power multiple-valued current-mode logic using substrate bias control'. Together they form a unique fingerprint.

Cite this