Low-loss pilot-beam delivery in hollow optical fiber for high-energy infrared laser light

Yi Wei Shi, Kentaro Ito, Yuji Matsuura, Mitsunobu Miyagi

Research output: Contribution to journalConference articlepeer-review

1 Citation (Scopus)

Abstract

New techniques were established in fabricating cyclic olefin polymer-coated silver (COP/Ag) hollow optical fiber. Low-loss properties in visible region were obtained owing to the smoother layers of silver and polymer. In silver layer plating, a SnCl2 solution pre-treatment was used to sensitize the inner surface of the glass capillary. A silver layer with an RMS surface roughness of 8 nm was obtained comparing with 18 nm RMS roughness without the pre-treatment. In the liquid-phase coating of the polymer layer, an ambient air of organic solvent was used in the whole process. A smoother polymer layer with RMS roughness of 10 nm was obtained comparing with 20 nm roughness when a normal nitrogen gas-flow was used. The straight and bending loss properties for the hollow fibers have been measured by using a CO2 laser and a red laser diode at the wavelengths of 10.6 μm and 0.63 μm. The straight losses were 0.4 dB and 1 dB for the hollow fiber (700 μmφ×1 m) made by the new developed fabrication techniques.

Original languageEnglish
Article number25
Pages (from-to)122-129
Number of pages8
JournalProgress in Biomedical Optics and Imaging - Proceedings of SPIE
Volume5630 I
DOIs
Publication statusPublished - 2005 Jul 21
EventOptics in Health Care and Biomedical Optics: Diagnostics and Treatment II - Beijing, China
Duration: 2004 Nov 82004 Nov 12

Keywords

  • Hollow fiber
  • Infrared lasers
  • Pilot beam
  • Visible light

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Biomaterials
  • Atomic and Molecular Physics, and Optics
  • Radiology Nuclear Medicine and imaging

Fingerprint Dive into the research topics of 'Low-loss pilot-beam delivery in hollow optical fiber for high-energy infrared laser light'. Together they form a unique fingerprint.

Cite this