Low-frequency linear motor design using electromagnetic analysis

Ryu Hirayama, Keisuke Fujisaki, Sumio Matsumori

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

To decrease the cost of low-frequency linear motor such as M-EMS (in-mold electromagnetic stirring) system and to obtain the process characteristics, it is necessary to estimate the maximum current and voltage as well as the distribution of magnetic flux density precisely. According to the measurement result of the M-EMS unbalanced three-phased electrical circuit, we find out that the standard deviation of the voltages is much smaller than that of currents. Then, it makes clear that the voltage source electromagnetic calculation is useful for the M-EMS design to obtain the maximum current and the magnetic flux density, through the comparison data of the experiment and the calculation.

Original languageEnglish
Pages (from-to)2056-2058
Number of pages3
JournalIEEE Transactions on Magnetics
Volume40
Issue number4 II
DOIs
Publication statusPublished - 2004 Jul 1

Keywords

  • Electromagnetic analysis
  • Electromagnetic stirring
  • End effect
  • Linear motor
  • Phase unbalance

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Low-frequency linear motor design using electromagnetic analysis'. Together they form a unique fingerprint.

Cite this