Long-range asynchronous on-chip link based on multiple-valued single-track signaling

Naoya Onizawa, Atsushi Matsumoto, Takahiro Hanyu

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

We have developed a long-range asynchronous on-chip data-transmission link based on multiple-valued single-track signaling for a highly reliable asynchronous Network-on-Chip. In the proposed signaling, 1-bit data with control information is represented by using a one-digit multi-level signal, so serial data can be transmitted asynchronously using only a single wire. The small number of wires alleviates the routing complexity of wiring long-range interconnects. The use of current-mode signaling makes it possible to transmit data at high speed without buffers or repeaters over a long interconnect wire because of the low-voltage swing of signaling, and it leads to low-latency data transmission. We achieve a latency of 0.45 ns, a throughput of 1.25 Gbps, and energy dissipation of 0.58 pJ/bit with a 10-mm interconnect wire under a 0.13 μm CMOS technology. This represents an 85% decrease in latency, a 150% increase in throughput, and a 90% decrease in energy dissipation compared to a conventional serial asynchronous data-transmission link.

Original languageEnglish
Pages (from-to)1018-1029
Number of pages12
JournalIEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences
VolumeE95-A
Issue number6
DOIs
Publication statusPublished - 2012 Jun

Keywords

  • Asynchronous circuits
  • Communication link
  • Delay-insensitive
  • Multiple-valued current-mode (MVCM) circuits
  • Network-on-Chip (NoC)

ASJC Scopus subject areas

  • Signal Processing
  • Computer Graphics and Computer-Aided Design
  • Electrical and Electronic Engineering
  • Applied Mathematics

Fingerprint Dive into the research topics of 'Long-range asynchronous on-chip link based on multiple-valued single-track signaling'. Together they form a unique fingerprint.

Cite this