L-band internally matched Si-MMIC front-end

Noriharu Suematsu, Masayoshi Ono, Shunji Kubo, Yoshitada Lyama, Osami Ishida

Research output: Contribution to journalArticlepeer-review

21 Citations (Scopus)

Abstract

A 1.9 GHz-band internally matched Si-MMIC frontend, fabricated in standard 0.8 urn BiCMOS process, was developed. This 1C front-end contains a MOSFET T/R switch, a two-stage BJT low noise amplifier (LNA), and a down converter BJT mixer. Since the circuits are monoli t hit-ally integrated on a low resistivity Si substrate, the coplanar waveguide (CPW) type spiral inductors are used to reduce the dielectric loss of on-chip matching circuits. The T/R switch has measured insertion loss of 2.5 dB and isolation of 25.5 dB at 0/3 V control voltage. The twostage LNA has gain of 17.1 dB and noise figure (NF) of 2.9 dB at 2 V, 4 mA dc supply. The mixer has conversion gain of 5.9 dB and NF of 15 dB at 2 V, 1.7 mA dc supply. The measured performance of the fabricated Si-MMIC front-end indicates the possibility of application to mobile communication handset terminals.

Original languageEnglish
Pages (from-to)2375-2378
Number of pages4
JournalIEEE Transactions on Microwave Theory and Techniques
Volume44
Issue number12 PART 2
DOIs
Publication statusPublished - 1996
Externally publishedYes

ASJC Scopus subject areas

  • Radiation
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'L-band internally matched Si-MMIC front-end'. Together they form a unique fingerprint.

Cite this