Irregular bending growth of free-standing Al microwire by electromigration

Yasuhiro Kimura

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Electromigration (EM) can generate free-standing micro- and nanowires that are occasionally irregularly bent to kinked and curved or collapsed shapes. The mechanism behind irregular bending was discussed based on electron microscopy data. Al microwires with the bamboo structure or single crystals were kinked at the grain boundaries (GBs) or at locations without GBs, respectively. Dislocation network and clusters of oxidation products were found in the wires. The kinking mechanism was attributed to the changing growth direction owing to GBs and the different growth rate of the outer circumference of the wire owing to the friction between the clusters and the TiN passivation. No buckling owing to gravity was observed. The high growth rate of Al microwires would be accompanied by low resistance in the discharge through a hole, which is attributed to the uniform friction along the periphery of the hole. In addition, the low wire diameter minimized the differences in growth rate. Hence, the increase in the growth rate of the wire by increasing the input current and substrate temperature and the decrease in the wire diameter favor wire straightness.

Original languageEnglish
Pages (from-to)276-287
Number of pages12
JournalActa Materialia
Volume157
DOIs
Publication statusPublished - 2018 Sep 15

Keywords

  • Aluminum
  • Electromigration
  • Grain boundaries
  • Kink
  • Microwire

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Polymers and Plastics
  • Metals and Alloys

Fingerprint Dive into the research topics of 'Irregular bending growth of free-standing Al microwire by electromigration'. Together they form a unique fingerprint.

  • Cite this