Iron Loss of Tertiary Recrystallized Silicon Steel (Invited)

K. I. Arai, K. Ishiyama, H. Mogi

Research output: Contribution to journalArticlepeer-review

19 Citations (Scopus)

Abstract

Tertiary recrystallization was observed after cold-rolling and annealing conventional silicon steels. The magnetic induction Ba at 800A/m of tertiary recrystallized sheets about 75pm thick is as high as 1.97T. Magnetic domain width in these sheets is wider than 1mm, hence the domain refining techniques such as mechanical scratching and chemical etching are employed in order to reduce the iron loss. The iron loss of the sheet mechanically scratched under the application of a tensile stress of 4kg/mm are as follows: W17/S0=0.42W/kg and W13/S0=0.19W/kg. However, this domain refining effect disappears after anneal ing for 30 minutes at 800oe. On the other hand, the domain refining by the chemical etching is ef fecti ve for the iron loss of the sheets even if they are annealed, and the iron loss of the sheet 71pm thick under the application of a tensile stress of 4kg/mm is as follows: W17/50=0.35W/kg and W13/50=0.17W/kg. The iron loss of a chemically etched sheet with thickness of 31pm is as follows: W17/50=0.21W/kg and W13/50=0.13W/kg.

Original languageEnglish
Pages (from-to)3949-3954
Number of pages6
JournalIEEE Transactions on Magnetics
Volume25
Issue number5
DOIs
Publication statusPublished - 1989 Sep

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Iron Loss of Tertiary Recrystallized Silicon Steel (Invited)'. Together they form a unique fingerprint.

Cite this