Iron and manganese removal by a membrane filtration system

Y. Jimbo, K. Goto

Research output: Contribution to journalArticlepeer-review

4 Citations (Scopus)

Abstract

The design standards of the iron and manganese removal system by membrane filtration were investigated. The membrane filtration after pre-chlorination could remove iron completely and could remove around 70% of manganese. In the case of manganese concentration being more than 0.05 mg/l, the membrane filtration could remove them completely after the deposition in the oxidation tank. The concentrations of iron and manganese were reduced more than 90% by the oxidation tank and were reduced until under the detection limit after the membrane filtration. The economic comparisons between the rapid sand filtration system and this membrane filtration system in a small capacity and a middle capacity were investigated. The 15 years total costs of the membrane filtration system were estimated to be smaller than or around equal to the rapid sand filtration system in both capacities.

Original languageEnglish
Pages (from-to)357-364
Number of pages8
JournalWater Science and Technology: Water Supply
Volume1
Issue number5-6
DOIs
Publication statusPublished - 2001 Jan 1

Keywords

  • Design standards
  • Economic comparison
  • Iron and manganese
  • Membrane filtration

ASJC Scopus subject areas

  • Water Science and Technology

Fingerprint Dive into the research topics of 'Iron and manganese removal by a membrane filtration system'. Together they form a unique fingerprint.

Cite this