Influence of the stress current on spin-torque-oscillator with NCMR-SV devices

Tetsuya Nakamura, Masaaki Doi, Susumu Hashimoto, Hitoshi Iwasaki, Masashi Sahashi

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

We investigated the microwave oscillations induced by spin transfer torque with a current-perpendicular-to-plane (CPP) nanocontacts spin-valve (NCSV) structure under dc current. First, we carefully studied the influence of the stress current, at which a synthetic-antiferromagnet (SAF)-spin-flop might take place with Joule heating under the applied field for measurement, on the SAF magnetization state for CPP-NCSV with high magnetoresistance (MR) ratio of approximately 20% to determine the applied current densities of the devices for microwave oscillation measurement, and then its microwave oscillation characteristics were clarified. The clear decrease in the MR ratio due to Joule heating was observed only in NCSV devices with high MR ratios. Therefore, the critical current density of the device for the microwave oscillation decreases with an increase in the MR ratio, which improves the oscillation efficiency. It suggests that the current is more effectively confined at NCs compared with the low MR devices. As a result, we succeeded in observing excellent oscillation characteristics, i.e., a large oscillation power of 64 nW and a narrow line width of 6.5 MHz at approximately 1.1 GHz in an NCSV device.

Original languageEnglish
Article number6028105
Pages (from-to)3377-3379
Number of pages3
JournalIEEE Transactions on Magnetics
Volume47
Issue number10
DOIs
Publication statusPublished - 2011 Oct

Keywords

  • High-temperature annealing
  • Joule heating
  • magnetic nanocontact magnetoresistance
  • magnetization dynamics
  • microwave oscillation
  • spin transfer torque (STT)
  • synthetic antiferromagnet

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Influence of the stress current on spin-torque-oscillator with NCMR-SV devices'. Together they form a unique fingerprint.

  • Cite this