Influence of silicon on intergranular corrosion for aluminum alloys

Yoshiyuki Oya, Yoichi Kojima, Nobuyoshi Hara

Research output: Contribution to journalArticle

Abstract

In an effort to improve the tensile strength of aluminum-silicon (Al-Si) alloys used in heat exchangers, we investigated the influence of Si concentration and heat treatment at 453 K on the susceptibility of Al-Si alloys to intergranular corrosion. It was found that the susceptibility to intergranular corrosion increased with an increase in Si concentration. It also initially increased with heat treatment at 453 K, but then decreased with long-term heat treatment at 453 K. The addition of Mg and Mn, which affeet the precipitation of Si, promoted precipitation and reduced the susceptibility of the Al-Si alloys to intergranular corrosion. With longer heat treatment at 453 K, large Si precipitates were observed in the grains and at the grain boundaries, which reduced the susceptibility to intergranular corrosion. Short term heat treatment at 453 K formed a continuous Si-depleted layer along the grain boundaries, which increased the susceptibility to intergranular corrosion. It is suggested that the susceptibility to intergranular corrosion was dependent on the addition ot Mg and Mn.

Original languageEnglish
Pages (from-to)52-59
Number of pages8
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume78
Issue number1
DOIs
Publication statusPublished - 2014 Jan

Keywords

  • Aluminum alloy
  • Brazing process
  • Heat treatment
  • Intergranular corrosion

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Influence of silicon on intergranular corrosion for aluminum alloys'. Together they form a unique fingerprint.

  • Cite this