Influence of shear-affected-zone due to punching on tensile characteristics of steel plate

Kejin Zhang, Shigeru Hamada, Motomichi Koyama, Tatsuo Yokoi, Hiroshi Noguchi

Research output: Contribution to journalConference article

Abstract

In punched steel plate, "punched specimen" from here onwards, the region near the edge of the punched hole is called the shear-affected-zone (SAZ), where tensile characteristics are compromised due to the punching process. However, the specific characteristics and influence on the tensile characteristics of the SAZ are unknown. Therefore, it is difficult to predict the effects of punching on the specimen. Here, we evaluated two kinds of specimens: punched and "honed." The hole of the honed specimen is formed by drilling and polishing, thus there is no SAZ on the honed specimens. In these specimens, we focused on the initiation and propagation of cracks under tensile loading and set the following objectives: (1) Determine whether any special events occur in the fracture mechanism of the punched vs honed specimens under tensile loading. (2) Find the reasons for any special events that occur. In our investigation, a punched specimen showed brittle fracture even within the static range of the strain rate. By failure surface observation of the punched specimens, we found that under tensile loading, cracks caused by the shear stress aligned with the tensile direction initiate in the SAZ. These cracks are the origin of the final fracture of the punched specimen. We assumed that whether the break is a ductile failure or brittle fracture depends on whether the crack tip becomes blunt. The differences in the fracture behaviors are investigated via detailed fracture surface observation.

Original languageEnglish
Pages (from-to)1047-1052
Number of pages6
JournalProcedia Structural Integrity
Volume13
DOIs
Publication statusPublished - 2018 Jan 1
Externally publishedYes
Event22nd European Conference on Fracture, ECF 2018 - Belgrade, Serbia
Duration: 2018 Aug 252018 Aug 26

Keywords

  • Brittle-ductile transition
  • Punched steel plate
  • Shear band
  • Shear-affected-zone
  • Tensile characteristic

ASJC Scopus subject areas

  • Mechanical Engineering
  • Mechanics of Materials
  • Civil and Structural Engineering
  • Materials Science(all)

Fingerprint Dive into the research topics of 'Influence of shear-affected-zone due to punching on tensile characteristics of steel plate'. Together they form a unique fingerprint.

  • Cite this