Influence of carbon and nitrogen addition on microstructure and hot deformation behavior of biomedical Co-Cr-Mo alloy

Yunping Li, Yui Yamashita, Ning Tang, Bin Liu, Shingo Kurosu, Hiroaki Matsumoto, Yuichiro Koizumi, Akihiko Chiba

Research output: Contribution to journalArticlepeer-review

15 Citations (Scopus)

Abstract

The microstructures and hot deformation behaviors of the Co-29Cr-6Mo (CCM) alloy and the same alloy with C and N addition (CCMCN) were compared and analyzed systematically. The results indicated that the γ phase of this alloy could be stabilized effectively by the slight addition of the elements C and N; however, M(Cr,Mo) 23C 6 precipitates were observed in the CCMCN alloy according to the results of the X-ray diffraction (XRD) pattern and electron probe micro analyzer (EPMA). The grain sizes of these two alloys after dynamic recrystallization (DRX) are influenced to a certain degree by the balance between athermal martensitic transformation during cooling in the CCM alloy and the existence of carbide in the CCMCN alloy, respectively. Athermal martensitic transformation during the cooling process significantly enhanced the grain refinement process in the CCM alloy at lower strain levels; while carbide helped to further refine grain size in the CCMCN alloy more significantly at high strain levels.

Original languageEnglish
Pages (from-to)849-854
Number of pages6
JournalMaterials Chemistry and Physics
Volume135
Issue number2-3
DOIs
Publication statusPublished - 2012 Aug 15

Keywords

  • Alloys
  • Biomaterials
  • Dynamic recrystallization
  • Precipitation

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics

Fingerprint Dive into the research topics of 'Influence of carbon and nitrogen addition on microstructure and hot deformation behavior of biomedical Co-Cr-Mo alloy'. Together they form a unique fingerprint.

Cite this