Influence of al concentration on deformation behavior and fracture mode of fe-30mn-6(SI, AL) alloys

K. Ogawa, T. Sawaguchi, T. Kikuchi, M. Koyama, M. Murakami

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

Microstructural and fřactographic observations were systematically done on Fe-30Mn-(6-x)Si-xAl (x=0, 1, 2 and 4 mass %) alloys. Optical and transmission electron microscopic observations and X-ray diffractions revealed that the deformation mode continuously shifts from the stress induced fcc/hcp martensitic transformation to the mechanical twinning of the fee austenite as the Al content increases. It was also clarified by the scanning electron microscopic observations that the microstructural change depending on the Al content is accompanied by the change in the fracture mode from the quasi-cleavage fracture to the ductile fracture.

Original languageEnglish
Title of host publicationSMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies
Pages645-652
Number of pages8
DOIs
Publication statusPublished - 2008 Dec 1
Externally publishedYes
EventInternational Conference on Shape Memory and Superelastic Technologies, SMST-2007 - Tsukuba, Japan
Duration: 2007 Dec 22007 Dec 5

Publication series

NameSMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies

Other

OtherInternational Conference on Shape Memory and Superelastic Technologies, SMST-2007
Country/TerritoryJapan
CityTsukuba
Period07/12/207/12/5

ASJC Scopus subject areas

  • Mechanics of Materials

Fingerprint

Dive into the research topics of 'Influence of al concentration on deformation behavior and fracture mode of fe-30mn-6(SI, AL) alloys'. Together they form a unique fingerprint.

Cite this