In-door atmospheric corrosion behavior of rapidly quenched amorphous Zr-Cu alloys

K. Asami, Eiji Akiyama, Y. Murakami, H. M. Kimura, M. Kikuchi, K. Hashimoto

Research output: Contribution to journalConference article

6 Citations (Scopus)

Abstract

A series of amorphous Zr-Cu alloys prepared by means of rapid quenching were exposed to a laboratory air (RH = 60±10%, i.e. wet air) for 15 months and in a dessicator (RH ≤ 30%, i. e. dry air) for 23 months. The surface of alloys after exposure was examined by SEM/EDX, XRD and AES. The original surface film on the alloys consisted mainly of ZrO 2 , and was protective. By exposure to the wet air, metallic copper and ZrO 2 were formed as corrosion products. The ZrO 2 formed on the Zr-Cu alloys was not in form of film and was not protective. The ZrO 2 formed was crystalline and mixture of monoclinic and tetragonal phases, the content of the latter phase increased with the increase in the alloy copper concentration. The surface film formed on the region in contact with the cooling wheel during quenching was rather unstable as compared with that formed on the freely solidified surface. Contaminants, such as C ℓ and S were often observed on the sites where corrosion started. The higher the copper content or the relative humidity, the larger was the corrosion rate.

Original languageEnglish
Pages (from-to)789-798
Number of pages10
JournalMaterials Science Forum
Volume185-188
Publication statusPublished - 1995 Jan 1
EventProceedings of the 7th International Symposium on Passivity Passivation of Metals and Semiconductors - Clausthal, Ger
Duration: 1994 Aug 211994 Aug 26

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'In-door atmospheric corrosion behavior of rapidly quenched amorphous Zr-Cu alloys'. Together they form a unique fingerprint.

  • Cite this

    Asami, K., Akiyama, E., Murakami, Y., Kimura, H. M., Kikuchi, M., & Hashimoto, K. (1995). In-door atmospheric corrosion behavior of rapidly quenched amorphous Zr-Cu alloys. Materials Science Forum, 185-188, 789-798.