Improvement of bit error rate using channel interleaving for channel binding WLAN prototype

Hiroyuki Nakase; Hiroshi Oguma; Suguru Kameda; Tadashi Takagi; Kazuo Tsubouchi; Mari Ochiai; Yukimasa Nagai; Akinori Fujimura; Yoji Isota

doi:10.1109/PIMRC.2008.4699826

Improvement of bit error rate using channel interleaving for channel binding WLAN prototype

Hiroyuki Nakase, Hiroshi Oguma, Suguru Kameda, Tadashi Takagi, Kazuo Tsubouchi, Mari Ochiai, Yukimasa Nagai, Akinori Fujimura, Yoji Isota

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Abstract

High speed wireless LAN prototype of 324 Mbit/sec has been developed. Six channel binding of 802.11a signal on frequecy domain was employed for increasing PHY data rate. Frame aggregation was employed to improve MAC-SAP throughput Individual adaptive data rate setting on each channel, so called adaptive dynamic channel assign was implemented in order to achieve maximum MAC-SAP throughput at any channel condition. In this paper, multiple channel interleaving over all frequency channels for randamization of burst error was presented. Interleaving can be carried out over all channels or inside individual channel. Bit and packet error rate were measured using implemented WLAN equipements with/without multiple channel interleaving. It was confirmed that improvement using multiple channel interleaving were measured to be 2dB.

Original language	English
Title of host publication	2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008
DOIs	https://doi.org/10.1109/PIMRC.2008.4699826
Publication status	Published - 2008 Dec 1
Event	2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008 - Poznan, Poland Duration: 2008 Sep 15 → 2008 Sep 18

Publication series

Name	IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC

Other

Other	2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008
Country	Poland
City	Poznan
Period	08/9/15 → 08/9/18

ASJC Scopus subject areas

Electrical and Electronic Engineering

Access to Document

10.1109/PIMRC.2008.4699826

Fingerprint Dive into the research topics of 'Improvement of bit error rate using channel interleaving for channel binding WLAN prototype'. Together they form a unique fingerprint.

Cite this

Nakase, H., Oguma, H., Kameda, S., Takagi, T., Tsubouchi, K., Ochiai, M., Nagai, Y., Fujimura, A., & Isota, Y. (2008). Improvement of bit error rate using channel interleaving for channel binding WLAN prototype. In 2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008 [4699826] (IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC). https://doi.org/10.1109/PIMRC.2008.4699826

Improvement of bit error rate using channel interleaving for channel binding WLAN prototype. / Nakase, Hiroyuki; Oguma, Hiroshi; Kameda, Suguru; Takagi, Tadashi; Tsubouchi, Kazuo; Ochiai, Mari; Nagai, Yukimasa; Fujimura, Akinori; Isota, Yoji.

2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008. 2008. 4699826 (IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Nakase, H, Oguma, H, Kameda, S, Takagi, T, Tsubouchi, K, Ochiai, M, Nagai, Y, Fujimura, A & Isota, Y 2008, Improvement of bit error rate using channel interleaving for channel binding WLAN prototype. in 2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008., 4699826, IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC, 2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008, Poznan, Poland, 08/9/15. https://doi.org/10.1109/PIMRC.2008.4699826

Nakase H, Oguma H, Kameda S, Takagi T, Tsubouchi K, Ochiai M et al. Improvement of bit error rate using channel interleaving for channel binding WLAN prototype. In 2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008. 2008. 4699826. (IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC). https://doi.org/10.1109/PIMRC.2008.4699826

Nakase, Hiroyuki ; Oguma, Hiroshi ; Kameda, Suguru ; Takagi, Tadashi ; Tsubouchi, Kazuo ; Ochiai, Mari ; Nagai, Yukimasa ; Fujimura, Akinori ; Isota, Yoji. / Improvement of bit error rate using channel interleaving for channel binding WLAN prototype. 2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008. 2008. (IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC).

@inproceedings{ace7dcf7dbd54ff0a25592b30316e76a,

title = "Improvement of bit error rate using channel interleaving for channel binding WLAN prototype",

abstract = "High speed wireless LAN prototype of 324 Mbit/sec has been developed. Six channel binding of 802.11a signal on frequecy domain was employed for increasing PHY data rate. Frame aggregation was employed to improve MAC-SAP throughput Individual adaptive data rate setting on each channel, so called adaptive dynamic channel assign was implemented in order to achieve maximum MAC-SAP throughput at any channel condition. In this paper, multiple channel interleaving over all frequency channels for randamization of burst error was presented. Interleaving can be carried out over all channels or inside individual channel. Bit and packet error rate were measured using implemented WLAN equipements with/without multiple channel interleaving. It was confirmed that improvement using multiple channel interleaving were measured to be 2dB.",

author = "Hiroyuki Nakase and Hiroshi Oguma and Suguru Kameda and Tadashi Takagi and Kazuo Tsubouchi and Mari Ochiai and Yukimasa Nagai and Akinori Fujimura and Yoji Isota",

year = "2008",

month = dec,

day = "1",

doi = "10.1109/PIMRC.2008.4699826",

language = "English",

isbn = "9781424426447",

series = "IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC",

booktitle = "2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008",

note = "2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008 ; Conference date: 15-09-2008 Through 18-09-2008",

}

TY - GEN

T1 - Improvement of bit error rate using channel interleaving for channel binding WLAN prototype

AU - Nakase, Hiroyuki

AU - Oguma, Hiroshi

AU - Kameda, Suguru

AU - Takagi, Tadashi

AU - Tsubouchi, Kazuo

AU - Ochiai, Mari

AU - Nagai, Yukimasa

AU - Fujimura, Akinori

AU - Isota, Yoji

PY - 2008/12/1

Y1 - 2008/12/1

N2 - High speed wireless LAN prototype of 324 Mbit/sec has been developed. Six channel binding of 802.11a signal on frequecy domain was employed for increasing PHY data rate. Frame aggregation was employed to improve MAC-SAP throughput Individual adaptive data rate setting on each channel, so called adaptive dynamic channel assign was implemented in order to achieve maximum MAC-SAP throughput at any channel condition. In this paper, multiple channel interleaving over all frequency channels for randamization of burst error was presented. Interleaving can be carried out over all channels or inside individual channel. Bit and packet error rate were measured using implemented WLAN equipements with/without multiple channel interleaving. It was confirmed that improvement using multiple channel interleaving were measured to be 2dB.

AB - High speed wireless LAN prototype of 324 Mbit/sec has been developed. Six channel binding of 802.11a signal on frequecy domain was employed for increasing PHY data rate. Frame aggregation was employed to improve MAC-SAP throughput Individual adaptive data rate setting on each channel, so called adaptive dynamic channel assign was implemented in order to achieve maximum MAC-SAP throughput at any channel condition. In this paper, multiple channel interleaving over all frequency channels for randamization of burst error was presented. Interleaving can be carried out over all channels or inside individual channel. Bit and packet error rate were measured using implemented WLAN equipements with/without multiple channel interleaving. It was confirmed that improvement using multiple channel interleaving were measured to be 2dB.

UR - http://www.scopus.com/inward/record.url?scp=69949149590&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=69949149590&partnerID=8YFLogxK

U2 - 10.1109/PIMRC.2008.4699826

DO - 10.1109/PIMRC.2008.4699826

M3 - Conference contribution

AN - SCOPUS:69949149590

SN - 9781424426447

T3 - IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC

BT - 2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008

T2 - 2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008

Y2 - 15 September 2008 through 18 September 2008

ER -