Hydrogen Supply Using Borohydride and Prototyping of a Miniature Fuel Cell by Sand Blasting

Shuji Tanaka, Asa Higashitani, Kei Sugie, Masayoshi Esashi

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

This paper describes two works on a miniature fuel cell for portable application: (1) Demonstration of the conceptual prototype of a borohydride fuel cartridge, and (2) Prototyping of a 4-cell-stacked miniature polymer electrolyte fuel cell (PEFC) by sand blasting. The borohydride fuel cartridge consists of aqueous solution of sodium borohydride (NaBH4), a catalyst for hydrolysis reaction of the fuel (BH4- + 2H2O → 4H2 + BO2-), and a hydrogen separation membrane of porous PTFE (polytetrafluoroethylene). The hydrogen separation membrane seals the fuel and reactant, securing users from their leakage. We confirmed the feasibility of this fuel cartridge by experiments. The miniature PEFC consists of two glass-based current collector plates, and a MEA (membrane electrode assembly) with cell interconnections and a gas seal. Four 7×7 mm single cells are placed in 27.5 mm square area, and electrically connected in series. The current collector plate was fabricated by photolithography and sand blasting, which are preferable for mass-production. The miniature PEFC was tested using hydrogen as fuel, and an output of 0.5 mW/cm2 was obtained from a single cell. Keywords : fuel cell, borohydride, portable device, sand blasting.

Original languageEnglish
Pages (from-to)340-345
Number of pages6
JournalIEEJ Transactions on Sensors and Micromachines
Volume123
Issue number9
DOIs
Publication statusPublished - 2003

Keywords

  • borohydride
  • fuel cell
  • portable device
  • sand blasting

ASJC Scopus subject areas

  • Mechanical Engineering
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Hydrogen Supply Using Borohydride and Prototyping of a Miniature Fuel Cell by Sand Blasting'. Together they form a unique fingerprint.

Cite this