HTS coil test facility in a large bore 20 T resistive magnet at LNCMI

Y. Miyoshi, X. Chaud, F. Debray, B. Vincent, P. Tixador, T. Lecrevisse, J. M. Rey, Hidetoshi Oguro, Satoshi Awaji, Kazuo Watanabe, G. Nishijima, H. Kitaguchi

Research output: Contribution to journalArticlepeer-review

11 Citations (Scopus)

Abstract

The high temperature superconductor (HTS) coil development, especially in the interest of high field insert coil, requires characterizations of a prototype coil in high magnetic field. Our test probe fits into the bore of ø 170 mm 20 T dc magnet, and the sample space ø 130 mm allows test coils with ∼ø 110 mm and 140 mm height. A fast data acquisition method at sampling period of 0.1 ms was developed for coil quench test program, and a working principle of the method is demonstrated for a small test coil. To accommodate high current required in tests such as Ic and hoop stress tests, the new current leads were manufactured with an optimal current measured in the range of 600 ∼ 700 A, which was sufficient for the envisaged coil tests. For short duration, the current lead could carry more than 1000 A without any influence of overheating in short sample Ic test. A demonstration of short sample Ic test is also presented.

Original languageEnglish
Article number6403524
JournalIEEE Transactions on Applied Superconductivity
Volume23
Issue number3
DOIs
Publication statusPublished - 2013 Feb 11

Keywords

  • Critical current
  • HTS
  • current lead

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'HTS coil test facility in a large bore 20 T resistive magnet at LNCMI'. Together they form a unique fingerprint.

Cite this