High Temperature Tensile Properties of 316 Stainless Steel Implanted with Helium

Akira Hasegawa, Norikazu Yamamoto, Haruki Shiraishi

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

Helium embrittlement is one of the problems in structural materials for fusion reactors. Recently, martensitic steels have been developed which have a good resistance to high-temperature helium embrittlement, but the mechanism has not yet been clarified. In this paper, tensile behaviors of helium implanted austenitic stainless steels, which are sensitive to the helium embrittlement, were studied and compared with those of martensitic steels under the same experimental conditions, and the effect of microstructure on helium embrittlement was discussed. Helium was implanted by 300 appm at 573-623 K to miniature tensile specimens of 316 austenitic steels using a cyclotron accelerator. Solution annealed (316SA) and 20% cold worked (316CW) specimens were used. Post-implantation tensile tests were carried out at 573, 873 and 973 K. Yield stress at 573 K increased with the helium implantation in 316SA and 316CW, but the yield stress changes of 316SA at 873 and 973 K were different from that of 316CW. Black-dots were observed in the as-implanted specimen and bubbles were observed in the specimens tensile-tested at 873 and 973 K. Intergranular fracture was observed at only 973 K in both of the 316SA and 316CW specimens. Therefore, cold work did not suppress the high-temperature helium embrittlement under this experimental condition. The difference in the influence of helium on type 316 steel and 9Cr martensitic steels were discussed. Test temperature change of reduction in area showed clearly that helium embrittlement did not occur in 9Cr martensitic steels but occurred in 316 austenitic steels. Fine microstructures of 9Cr martensitic steels should suppress helium embrittlement at high temperatures.

Original languageEnglish
Pages (from-to)1090-1096
Number of pages7
JournalMaterials Transactions, JIM
Volume34
Issue number11
DOIs
Publication statusPublished - 1993

Keywords

  • austenitic stainless steel
  • helium bubble
  • helium embrittlement
  • helium implantation
  • martensitic steel
  • tensile property

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Dive into the research topics of 'High Temperature Tensile Properties of 316 Stainless Steel Implanted with Helium'. Together they form a unique fingerprint.

Cite this