High-efficiency differential-drive CMOS rectifier for UHF RFIDs

Koji Kotani, Atsushi Sasaki, Takashi Ito

Research output: Contribution to journalArticle

296 Citations (Scopus)

Abstract

A high-efficiency CMOS rectifier circuit for UHF RFIDs was developed. The rectifier has a cross-coupled bridge configuration and is driven by a differential RF input. A differential-drive active gate bias mechanism simultaneously enables both low ON-resistance and small reverse leakage of diode-connected MOS transistors, resulting in large power conversion efficiency (PCE), especially under small RF input power conditions. A test circuit of the proposed differential-drive rectifier was fabricated with 0.18 μ m CMOS technology, and the measured performance was compared with those of other types of rectifiers. Dependence of the PCE on the input RF signal frequency, output loading conditions and transistor sizing was also evaluated. At the single-stage configuration, 67.5% of PCE was achieved under conditions of 953 MHz, - 12.5 dBm RF input and 10 KΩ output load. This is twice as large as that of the state-of-the-art rectifier circuit. The peak PCE increases with a decrease in operation frequency and with an increase in output load resistance. In addition, experimental results show the existence of an optimum transistor size in accordance with the output loading conditions. The multi-stage configuration for larger output DC voltage is also presented.

Original languageEnglish
Article number5308586
Pages (from-to)3011-3018
Number of pages8
JournalIEEE Journal of Solid-State Circuits
Volume44
Issue number11
DOIs
Publication statusPublished - 2009 Nov 1

Keywords

  • Differential
  • Power conversion efficiency (PCE)
  • Radio frequency identification (RFID)
  • Rectifier
  • Ultra-high frequency (UHF)

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'High-efficiency differential-drive CMOS rectifier for UHF RFIDs'. Together they form a unique fingerprint.

  • Cite this