Grindability of Ti(C,N)-Mo2C-Ni Alloy with Diamond Wheels

Hisashi Suzuki, Hideaki Matsubara, Koji Hayashi, Yasuo Tsujigo

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The grindability of Ti(C,N)-MoaC-Ni alloy was studied by using reginoid-bonded and nickel plated wheels with two kinds of diamond powders (single crystallike and polycrystallike) and single grit cutter. The TiC-Mo2C-Ni and WC- Co alloys were also tested for comparison. The binder content of those alloys was kept at 16.4 vol%. It was found that the grindability was excellent in the following order; WC-Co, TiC-Mo2C-Ni and Ti(C,N)-Mo2C-Ni alloys. It was also found that the wear of diamond in cases of nickel plated wheel and single grit cutter was most marked for Ti(C,N) base alloy; explaining the lowest grindability of the alloy. The wear of diamond particles seems to owe most to the mechanical one including microscopic fracture at the cutting edge and striation-formation on the flank surface of each particle.

Original languageEnglish
Pages (from-to)235-242
Number of pages8
Journaljournal of the japan society of powder and powder metallurgy
Volume30
Issue number6
DOIs
Publication statusPublished - 1983 Jan
Externally publishedYes

ASJC Scopus subject areas

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Grindability of Ti(C,N)-Mo2C-Ni Alloy with Diamond Wheels'. Together they form a unique fingerprint.

  • Cite this