Grain refinement of transient liquid phase bonding zone using ODS insert foil

Hiroyuki Noto, Ryuta Kasada, Akihiko Kimura, Shigeharu Ukai

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

Joint strengthening of oxide dispersion strengthened (ODS) martensitic steel has been attained by a transient liquid phase (TLP) bonding utilizing a newly developed ODS insert foil. The ODS insert foil (Fe-9Cr-2W-0.2Ti-0.35Y 2O3-0.5C-3B-2Si) was fabricated using mechanical alloying and a spark plasma sintering method. Compared to conventional TLP bonding with a non-ODS insert foil (Fe-0.5C-3B-2Si), the microstructure of the melted zone consists of finer grains in the joint with the newly developed ODS insert material, and the grain size is almost one third of that in the conventional insert material. This increases the hardness by ΔHv = 100 in the region of the joints. Oxide particles that are coherent to the ferritic matrix in the ODS insert foil could be responsible for the grain refinement, which is explained in terms of enhanced nucleation of consolidation matrix at the oxide particles.

Original languageEnglish
Pages (from-to)S567-S571
JournalJournal of Nuclear Materials
Volume442
Issue number1-3 SUPPL.1
DOIs
Publication statusPublished - 2013 May 30
Externally publishedYes

ASJC Scopus subject areas

  • Nuclear and High Energy Physics
  • Materials Science(all)
  • Nuclear Energy and Engineering

Fingerprint Dive into the research topics of 'Grain refinement of transient liquid phase bonding zone using ODS insert foil'. Together they form a unique fingerprint.

Cite this