Formation of protection layer during oxidation of Al-implanted TiN coating

Thananan Akhadejdamrong, Atsushi Mitsuo, Chihiro Iwamoto, Takahisa Yamamoto, Yuichi Ikuhara, Tatsuhiko Aizawa

    Research output: Contribution to journalArticlepeer-review

    7 Citations (Scopus)

    Abstract

    A protective nanocrystalline aluminum oxide layer forms during oxidation of Al-implanted TiN thin film coating on stainless steel substrate. TiN itself has poor chemical stability at elevated temperatures in an oxidizing atmosphere. Implantation of Al-ions to a TiN film, prepared by hollow cathode discharge ion plating (HCD-IP), at 4.5 × 1017 ions·cm-2 has greatly improved thermal oxidation resistance at temperatures up to 973 K and for periods up to 20 h in a pure oxygen atmosphere. Al-implantation significantly reduced the oxidation rate of the TiN. The apparent activation energy for oxidation increased with increasing Al-dose. At the initial stage of oxidation, free metallic aluminum and/or new AlN- or more likely (Ti, Al)N-reacted with oxygen prior to oxidation of TiN. The thin aluminum oxide layer formed on the implanted samples was dense and free from surface flaws. This layer is thought to act as a barrier to oxygen migration protecting the TiN film from further oxidation. The diffusion of Al-atoms was a driving mechanism to activate the protection of TiN at high oxidation temperatures. The alteration of the oxidation kinetics and mechanism of the implanted TiN in an oxygen atmosphere is a consequence of the effective modification of oxide properties through Al incorporation.

    Original languageEnglish
    Pages (from-to)1291-1297
    Number of pages7
    JournalMaterials Transactions
    Volume43
    Issue number6
    DOIs
    Publication statusPublished - 2002 Jun

    Keywords

    • Activation energy
    • Aluminum oxide
    • Ion implantation
    • Nanocrystalline
    • Thin film
    • Titanium nitride

    ASJC Scopus subject areas

    • Materials Science(all)
    • Condensed Matter Physics
    • Mechanics of Materials
    • Mechanical Engineering

    Fingerprint Dive into the research topics of 'Formation of protection layer during oxidation of Al-implanted TiN coating'. Together they form a unique fingerprint.

    Cite this