Ferromagnetic resonance heating of Fe and Fe3O4 by 5.8GHz microwave irradiation

Noboru Yoshikawa, Tomotsugu Kato

Research output: Contribution to journalArticlepeer-review

13 Citations (Scopus)

Abstract

Compressed Fe3O4 powder and Fe sheet were pre-heated to various temperatures higher than 300 °C in a microwave magnetic field (hrf). Then an external static magnetic field (Hext) was imposed perpendicularly to hrf and the temperature increased (ΔT: temperature difference from the pre-heated temperature, ΔT max: ∼200 °C (Fe), ∼50 °C(Fe3O 4)). It had a peak at almost the same Hext during ascent and descent of Hext because of ferromagnetic resonance (FMR). In fact, ΔT became smaller as the preheating temperature was raised to approach the Curie temperature, and Hext corresponding to the temperature peak shifted higher. This report provides FMR heating data under various conditions with quantitative discussion and proposes application of a new heat treatment to materials.

Original languageEnglish
Article number425403
JournalJournal of Physics D: Applied Physics
Volume43
Issue number42
DOIs
Publication statusPublished - 2010 Oct 27

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Acoustics and Ultrasonics
  • Surfaces, Coatings and Films

Fingerprint Dive into the research topics of 'Ferromagnetic resonance heating of Fe and Fe<sub>3</sub>O<sub>4</sub> by 5.8GHz microwave irradiation'. Together they form a unique fingerprint.

Cite this